User manual

Email your order to us at [e-mail]
20
Mains Conditioner For Home
Cinema And Hi Fi
A useful upgrade for any setup, this is an affordable
yet extremely well designed unit that delivers impressive
results. This unit contains a powerful Mains Conditioning
Filter which will reduce or eliminate mains interference
coming through the mains electric supply and help
to enhance your sound and picture quality. It also
incorporates Surge Protection for complete piece of mind.
Specifications:
• Max Current rating 13A
• Max Surge Protection L-N 6500A, L-E 4500A,
N-E 4500A
• Max Voltage Spike Protection 6,000 Volts
Features:
• 2m Screened Mains Lead to prevent RFI
‘What Hi-Fi Magazine gave this a 5 star Award:
“The six-way mains conditioner delivers truly dynamic audio
gains. Comparing it’s performance to the ‘unconditioned’
sound, our reference CD/Amp system enjoys greater separation
and focus of sound, and greater clarity and confidence in the
mid range. Bass is burlier and better integrated, too. In a
nutshell? It really does work.”
Code CS929 £ 29.99
Internet Controllable Mains Switch
New from Keene, the IPMSW1 is an IP controllable mains power switch. It has two independent mains outlets that
can be controlled in a number of ways.
Features:
• Simple browser button based on / off control.
• Full browser based set-up and timer configuration.
• Adjustable power fail re-start options allow each
switch to delay up to 255 seconds before switching
on. Ideal for remote re-start of systems that require
2 stage start ups.
• 3 timer events per switch with daily weekly or
monthly repeats.
• During each timer event the switch can be set to
either on or off.
• Own IP address, so can be controlled via internet
using port forwarding.
• Support for DDNS.
• Manual override button for each switch.
• Optionally use internet time servers to set
internal clock.
• Internal “Real Time Clock” IC with 5 year
battery backup.
Code IPMSW1 £ 119.99
Power Ethernet Sockets
The PE200AV Power Ethernet Sockets embed all the
electronics inside a standard wall power socket. The
technology allows the use of the existing mains cables
as a way to transmit high speed data and
environmental services throughout the building
without the cost and disruption of installing
additional cabling.
• No rewiring required
• Simple to install by any electrician – simply replace
a power socket with an Power Ethernet Socket
• Reduces infrastructure costs by using existing mains
cabling throughout the building
• Minimises installation disruption — no need to lift
floor panels and replacing a socket is quick and
easy
• All Ethernet points automatically mesh together
into a secure network without needing a patch
panel and Ethernet switch
• Much cheaper to replace existing power sockets
with PE Sockets than to add additional structured
cables
Code PE200AV each £79.00
for two £156.00
for four £300.00
Power Solutions
X10 Transceiver Module
The transceiver module catches the radio signals
emitted by any X10 compatible transmitter (eg KR22E,
SS13E etc) and converts them into X10
signals for the mains wiring. It simply
plugs into the mains wherever you find
convenient and looks very much like an
appliance module with a small aerial
attached. The transceiver module also has
an outlet socket and can be used like an
appliance module although its address
code cannot be altered from address
code 1. It has an effective reception
range of around 30 metres so normally
one (centrally located) transceiver
module is enough to ensure that an
X10 remote will work more or less
anywhere within the house.
X10 is a communication protocol for remote
control of mains electrical devices. It works by
passing control signals through your existing
mains wiring. There are two essential parts to
an X10 installation; a transmitter and a receiver.
The transmitter generates the control signal
(‘switch on’, ‘switch off’, ‘brighten’ or ‘dim’)
and these signals are acted upon by receiver
modules connected to the mains within the
house. In essence, X10 allows you to assign a
unique "address" to every electrical item you
want controlled. Commands can then be sent
to each particular address, allowing items to
be turned on and off, (or dimmed) as required.
There are a number of different ways to send
a command to an "address", either by a timer,
remote control, computer control, wall switch
or even by telephone. You can have up to 256
unique addresses per house, and of course some
devices can be set to the same address so that
one command can switch them all on or all off at
the same time. You can buy individual modules to
build a system, or buy a starter kit to get you going.
Because X10 uses your existing house wiring there
are no extra cables to run and the beauty of the
system is that you can expand it almost endlessly.
Most of the X10 products require no DIY skills at
all, you just plug the devices in and start using
them. A few of the products (wall switches etc)
do require some basic electrical DIY skills for safe
installation and operation. (As ever, if you're in
doubt please consult a qualified electrician.)
Many more X10 modules and
controllers to choose from on
www.keene.co.uk
What is X10?
Code TM13U £19.85
X10 Appliance Module
AM12 Appliance / Switch Module
Simplicity itself, just unplug the device you want
controlled, plug this into the socket then plug the
device back in. Set the X10 address as needed and you
now have instant X10 control. The module can switch
on or off an appliance of up to 13 amps, ideal for
kettles, fans, heaters, lamps, etc.
For appliances and low energy
lamps
Code AM12U £22.30
X10 Lamp Module
Gives you instant X10 control of any plug in lamp.
Plugs into a 13 amp socket and will switch on/off lamps
plugged into the module's standard 3 pin socket. In
addition it can dim/brighten (standard tungsten or
halogen filament bulbs only, NOT fluorescent).
Load 40W (minimum) 300W
(max) incandescent lamps only.
Soft start and smooth dimming
features.
Can be regulated from 0%
lighting to the desired dim
setting.
Code LM12U £22.30
X10 Internet Control
Use your smartphone or tablet to operate your X10
devices. The TIP10RF connects directly to your network
router and sends
commands
wirelessly to
the nearest
transceiver, e.g.
TM13U. No need
to leave your
computer turned
on. Download
the free Android
app from the Play
Store. (iOS app to
follow shortly.
Code TIP10RF £52.00
117657_Connections_October_2014.indd 20 16/10/2014 11:21