User manual

Email your order to us at [e-mail]
18
HDMI Over Long Distances
HDMI over CAT Extender with
Audio Return Channel & Two
Way IR Control
The Coosis HDMI Extender over CAT6 extends HDMI at up
to 1080P up to 50m over a single CAT5E/6 cable.
The Sender features a handy HDMI pass through port for
easy connection to both local and remote devices. It also
features a coaxial digital audio output for your AV amplifier.
When the ARC (audio return channel) function is switched
on the coaxial port will independently output the returned
audio signal from the remote HDTV - even if the sender unit
is off.
Both the sender & receiver support two way IR transmision
for full control (one IR receiver and one IR emitter are
included in the pack, and an additional IR receiver and IR
emitter set can be purchased separately (ref CIRSET). The
extra receiver / emitter will be needed to take advantage of
the two-way IR feature).
The HECAT6ARC has two distance modes to work at either
0-20m or 20-50m. This switching ensures the most reliable
results by avoiding the application of too much gain when
it is not required. It also features 9 configurable Av output
output options plus an EDID copying mode for maximum
compatability.
Code HECAT6ARC £ 119.99
Express Install Multi-room HDMI System
Express Installation Kit - 4 x 4 HDBaseT™ LITE Matrix with PU-514L-RX Receivers. This 4 by 4 HDMI HDBaseT™ Lite Matrix
Express Installation Kit has been developed as a robust and cost effective solution at the heart of any four zone multi-room
environment. Supplied complete with a HDBaseT™ Lite Matrix plus four PU-514L-RX receivers, the kit enables an installer
to easily and confidently configure a 4-zone multi-room AV system using HDBaseT Lite technology and distribute content
throughout the system over a Single CAT5e/6/7 cable infrastructure.
The Express Install Kit supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-
channel digital audio, and control via IR, RS-232, or Web GUI/Telnet IP, from four high definition sources to four HDBaseT
outputs over a single CAT5e/6/7 cable (up to 60m) for each output.
The PU-44XL-KIT is supplied with 4x
PU-514L-RX receivers which utilise the
2-way IR control capabilities of the
matrix.
Use the IP control feature to enable
users to access and control the matrix
remotely and also allow additional
options for integration of third-party
control systems. CYP provide control
drivers for control systems such as
Control 4, RTI, Crestron, AMX, Control
FX, and Demopad. These are available at
no extra cost.
Code PU44XLKIT £ 1768.71
The PU-1107 can send and receive a pure digital HDMI
signal over a single CAT6 cable allowing HD Audio & ‘deep
colour’ support.
Code PU1107 £ 175.34
Features:
• v1.3 HDMI, HDCP 1.1, DVI 1.0 compliant
• v1.3 HDMI over single CAT6 transmitter and receiver set
• Resolution supported: HDTV - 480i to 1080p including
1080p24fps
• High Definition Audio supported: Dolby TrueHD, Dolby
Digital Plus and DTS-HD Master Audio plus LPCM
• Supports CEC bypass
• Supports xvYCC
• Equalises and recovers incoming TMDS data before
re-transmitting to ensure optimum signal quality
• Supports Deep Colour (up to 12 bit)
HDMI over single CAT6
transmitter and receiver
PU1H2HBTE
Code PU1H2HBTE Two Way £454.89
Code PU1H3HBTL Three Way (Lite) £526.71
Code PU1H3HBTE Three Way £790.06
Code PU1H7HBTL Seven Way (Lite) £1053.42
Code PU1H7HBTE Seven Way £1699.84
PU1H3HBTE
PU1H7HBTE
PU1H3HBTL
HDBaseT HDMI
Distribution Systems
New from CYP, a range of HDMI HDBaseT distribution
amplifiers. Each model will take one HDMI input and send it
uncompressed to two, three or even seven outputs. If you
don’t need the flexibility (and cost) of a full matrix system
but want all the advantages that HDBaseT has to offer then
these are perfect for both residential and commercial
AV installations.
Please note PU514LRX receiver is supplied separately, please see website for details
HDBaseT Lite HDMI Extender
The PU-513/514 systems allow uncompressed HDMI, IR and
RS-232 signals to be transmitted over a Single CAT5e/6
cable to distances of up to 60m.
Features:
• HDMI 1.4 with 3D, 4K×2K support, HDCP and DVI
compliant
• Supports HDMI 1.4 (including HDCP) over a single
CAT5e/6 up to 60m
• Complies with HDBaseT- Lite specifications
• Full HD resolution support (1080p@60Hz/36-bit), 3D
over 60m, 4Kx2K over 40m and PC resolution support
(VGA to WUXGA) over CAT5e/6 cable
• HDMI input up to 15m with 8-bit deep colour, or 10m
with 12-bit deep colour
• Supports HDMI output up to 15m with 8/12-bit deep
colour
• Supports IR and RS-232 Control
• Supports High Definition LPCM 7.1CH, Dolby TrueHD,
Dolby Digital Plus and DTS-HD Master Audio transmission
Code PU513L £253.78
With one-way IR (receiver back to transmitter)
With two-way IR control
Code PU514L £255.87
Sender input:
1 x HDMI type A 19pin female
Sender Output:
1 x RJ45
1 x HDMI type A 19pin female
Receiver input:
1 x RJ45
Receiver output:
1 x HDMI type A 19pin female
1 x coaxial female
In/Out resolutions:
480i/P, 720P, 1080i/P@60
Audio support: LCPM, AC-3, DTS 7.1, DSD
Power: 5v DC 1000mA, UK adaptor supplied
Dimensions (sender & receiver): 100 x 65 x 25mm
117657_Connections_October_2014.indd 18 16/10/2014 11:21