PU-1107-KIT Pure Digital v1.
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product.
Table of Contents 1. 2. 3. 4. 5. 6. 7. Introduction................................................................................... 1 Applications.................................................................................. 1 Package Contents....................................................................... 1 System Requirements................................................................... 1 Features.........................................................................................
1. Introduction The HDMI 1.3 transmitter and receiver over ONE CAT 6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT 6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/ color) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a bandwidth up to 225MHz. The HDMI 1.
5. Features HDMI 1.3, HDCP 1.1 and DVI1.1 compliant. Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/ color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio . Uses one CAT-6 cable for data/DDC transmission. Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
6. Specifications Frequency Bandwidth 2.25Gbps (single link) Transmitter Input/Output Ports 1 x HDMI Female port/1 x CAT6 Receiver Output/Input Ports 1 x HDMI Female port/1 x CAT6 Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified) ESD Protection Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions (mm) 78.5 (W) X 102 (d) X 30 (H) / Tx 78.
7. Operation Controls and Functions 7.1 Front Panel CH-1107TX HDMI INPUT ① CH-107RX DC 5V DC 5V ② ② HDMI OUT ③ ① HDMI INPUT: This slot is where you connect the HDMI or DVI output port of your source equipment such as DVD/Blu Ray players or Set-top- boxes with an HDMI cable or link up with another receiver unit from the same family to extend a signal over long distances. ② DC 5V: This is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.
7.2 Rear Panel CH-1107TX EDID CH-107RX CAT6 OUT CAT6 IN ② ② 10 Bit TV/STD 8 Bit 12 Bit ① ① EDID Control Switcher: Switch the EDID between STD and TV. Switch to STD to use the built-in EDID or switch to TV to use the TV’s EDID. The default factory setting is TV, leave as is when the display is working properly. Note: 1. When EDID is switched to STD the unit will use its built-in EDID which supports: Video → 1080p 8-bit, 10-bit or 12-bit (max) Audio → PCM 2CH 2.
8.
A Acronyms Acronym Complete Term CAT6 Category 6 Cable EDID Extended display identification data HDMI High-Definition Multimedia Interface 7
www.cypeurope.
