Specifications

Find product information and data sheets on www.keene.co.uk
21
www.keene.co.uk
Distribution
PUMA 1106 HDMI over
CAT5E/5 Extender
The CYP Puma HDMI over CAT6 Extender Set with IR Pass-
through is the perfect solution to extend HDMI signals via
CAT cabling up to 40m. The PU-1106 also allows you to use
your existing Remote Control to control your device with the
included IR Receiver & Blaster.
Features:
• v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant.
• HDMI over CAT6 Extender Set.
• Resolutions supported: PC - VGA to WXGA; HDTV - 480i
to 1080p plus 1080p24fps.
• High Definition Audio supported: Dolby TrueHD, Dolby
Digital Plus and DTS-HD Master Audio plus LPCM.
• Compatible with CAT-5E and CAT-6 cables. CAT-6 is
recommended for better performance.
• Supports CEC functions & IR blaster.
• Supports ‘Deep Colour’ (10, & 12 bit) - Transmission
distances may be reduced at higher colour depths.
• Equalises and recovers incoming TMDS data before re-
transmitting to ensure optimum signal quality.
• Supports xvYCC.
HDMI over CAT5E/5 Multiroom
Distribution System
This is a great value HDMI over Cat cable distribution system
that allows you to mix and match between stand-alone and
wall-plate receivers. All types support 3D and provide
IR feedback!
The sender unit takes a single HDMI
input and transmits it via twin runs
of CAT cable to up to four outputs
up to a distance of 30.0m without
signal loss.
This unit receives HDMI signals
sent from the transmitter unit
This unit is the wall-plate version
which receives HDMI signals sent
from the transmitter unit
Code PU1106 £205.04
Features:
• Easy connection and installation
• Supports 24/36bit deep colour video formats
• Supports LPCM/LPCM7.1/DSD/DVD audio Dolby®-AC3/
DTS5.1/DTS-HD/DTS master audio/Dolby® Digital Plus
and Dolby® True-HD audio formats
• Can be used with stand alone or wall plate
HDMI receivers
• Requires two Cat5e/6 STP/FTP cables per receiver
(not supplied)
• Power required for the transmitter unit only
Specifications:
• HDMI version: High speed with 3D support
• HDCP version: 1.2
• Resolution: 1080P/1080i/720P/576P/576i/480P/480i
• Data transfer rate: Max 6.75Gbps
• Dimensions of transmitter: 111 x 75 x 23.5mm
• Weight of transmitter: 1190g
• Weight of power supply: 165g
• Power supply: 9Vdc 4A
• Dimensions of stand alone receiver: 82.4 x 69.5 x 22mm
• IR emitter and receiver lead length: 1.5m
• Dimensions: 33 x 14 x 19mm
• Weight: 25
You can buy them as individual components:
Code
H4T 4 output transmitter £229.00
Code H4SR Stand alone receiver £46.00
Code H4WR Wall plate receiver £46.00
Code H4IRR IR receiver unit £8.99
Code H4IRE IR emitter £8.99
Or as complete kits including the IR receivers and emitters:
Code
H4KIT1 with 1 x transmitter,
2 x stand alone receivers,
2 x IR receivers and
1 x IR emitter
£315.00
Code H4KIT2 with 1 x transmitter,
4 x stand alone receivers,
4 x IR receivers and
1 x IR emitter
£399.00
Code H4KIT3 with 1 x transmitter,
2 x wall plate receivers,
2 x IR receivers and
1 x IR emitter
£315.00
Code H4KIT4 with 1 x transmitter,
4 x wall plate receivers,
4 x IR receivers and
1 x IR emitter
£399.00
H4KIT2
H4KIT4
You can also use two wall plates as a single room-to-room option:
Code
HWPK 4 output transmitter £79.99
HWPK
116513_HDMI_Brochure_Aug_2013.indd 21 11/09/2013 14:27