Specifications

PU1H2HBTE
Component to HDMI Convertor
COMPONENT and Audio input to HDMI output
This unit will take in a Component video signal plus
analogue stereo audio and
convert the output to digital HDMI.
HDMI 1.3 compatible
Supported Component
input resolutions:
4801/P, 576i/P, 720P 1080i/P
Specifications:
• Video input: 3 x RCA phono
• Audio input: 2 x RCA phono
• Video Output: HDMI socket
• Dimensions: (WxHxD): 84 x 28 x 76mm
• Power: 5V 2A (UK mains adaptor supplied)
HDMI Down Converter
The VS-226 HDMI to CV/
SV/Stereo Down Converter
converts digital HDMI signals
(or a DVI input signal with S/PDIF coaxial audio) to NTSC or
PAL analog video signals and also provides a L/R stereo audio
output. Besides S-Video and Composite Video outputs, it
provides a re-clocked HDMI signal which delivers a jitter free
bypassed output of the original HDMI signal. In addition,
either a bitstream derived HDMI audio signal or a coaxial
input signal is processed and provided to an external audio
amplifier via a coaxial S/PDIF digital audio connector. The
VS-226 provides a convenient way for the user to watch a
high definition television program while also recording it in
standard resolution via a DVR or VCR.
Features and Specification:
• Automatic Signal Conversion
• HDMI or DVI HDTV Signals from 480p to 1080p
• HDMI or DVI HDTV to NTSC or PAL Conversion
• Converts HDMMI Bitstream audio to S/PDIF Audio
• Provides analog L/R Stereo Audio Output
• Converts PC signals to UXGA/60Hz to NTSC/PAL
Important! Please be aware that this unit will not output composite video, s-video or stereo
audio from an HDCP protected source. A source such as a Blu-ray or SkyHD usually uses HDCP
and so only the HDMI loop-through and digital audio ouput will be active. If you would like
any guidance with this please don’t hesitate to contact us.
Find product information and data sheets on www.keene.co.uk
19
www.keene.co.uk
...So take a look now
Code VS226 £181.71
Code HDUHC £124.99
HDMI Format Convertors
Code CHUCH £64.99
HDMI V1.3 To Component or
VGA Convertor
HDMI in to COMPONENT (or RGBHV) & AUDIO out.
This unit will take in HDMI and give out either Component
video (Y, Pb, Pr) or RGBHV (PC signal), plus spdif or
analogue stereo audio. It enables you to connect your new
HDMI sources to older analogue displays. A manual selector
switch allows you to choose
between either of the two HDMI
inputs. HDCP compliant
Specifications:
•
Video Input: HDMI connector
•
Compliant with HDMI 1.3
and HDCP 1.2
•
Output: Analogue HD-15 (RGBHV / YPbPr)
•
Operation frequency: up to 165MHz
•
Resolution: RGBHV up to UXGA@60Hz, Component
up to 1080i (note this unit will not scale the signal, the
output resolution is determined by the resolution of the
input signal – please check your display is compatible
with the resolution produced)
•
Dimensions: (WxHxD): 130 x 34 x 94mm
•
Power: 5V 2A (UK mains adaptor supplied)
Code PU1H2HBTE Two Way £419.24
Code PU1H3HBTL Three Way (Lite) £526.72
Code PU1H3HBTE Three Way £790.08
Code PU1H7HBTL Seven Way (Lite) £1053.44
Code PU1H7HBTE Seven Way £1669.88
PU1H3HBTE
PU1H7HBTL
PU1H7HBTE
PU1H3HBTL
HDBaseT HDMI
Distribution Systems
New from CYP, a range of HDMI HDBaseT distribution
amplifiers. Each model will take one HDMI input and send
it uncompressed to two, three or even seven outputs. If you
don’t need the flexibility (and cost) of a full matrix system
but want all the advantages that HDBaseT has to offer then
these are perfect for both residential and commercial
AV installations.
Please note PU514LRX receiver is supplied separately, please see website for details
116513_HDMI_Brochure_Aug_2013.indd 19 12/09/2013 09:23