Specifications

Email your order to us at [e-mail]
16
HDMI Format Convertors
More details on all products can be found online at...
Code CHUHV £59.99
Code XA1 £300.31
HDMI to VGA & Audio
Convertor
HDMI in to VGA and decoded analogue audio out
This unit will take in HDMI and give out VGA with analogue
stereo audio.
HDMI 1.3 compatible
Supported input resolutions:
4801/P, 576i/P, 720P 1080i/P
Specifications:
• Video Input: HDMI socket
• Audio Output: 3.5mm jack socket
• Video Output: 15pinHD VGA connector
• Dimensions: (WxHxD): 84 x 28 x 76mm
• Power: 5V 2A (UK mains adaptor supplied)
HDMI extender over CAT5
with IR control
This product makes a very affordable method of sending
HDMI over long distances whilst preserving the full HD
capability. The transmitter converts the HDMI signal into a
balanced differential signal and the receiver converts it back
into a conventional HDMI signal again. It uses two runs of
CAT5E (or CAT6) cable and allows for full auto-adjustment
of feedback and equalisation with no user-intervention
required. This model also provides IR feedback along the
same CAT5 cables for control of source equipment from the
viewing area.
Long HDMI cables are expensive and unwieldy, whereas
CAT5E cable is cheap and flexible making it much more
suitable for long distance runs. This pair of units can send
HDMI at full 1080p up to 50m and can also be used for
DVI-D signals with a suitable adaptor such as the KA169
Features:
• Watch and operate your HD Content elsewhere on
your TV
• Watch films, look at photographs and listen to music
from, for example, your Media Centre PC, Blu-Ray player,
game console, set top box or hard-disk recorder on a
different TV/projection screen in perfect HD quality
• Operate your connected A/V equipment remotely via the
infrared return signal
• Wired signal transmission up to 100 metres!
• Optimum price/quality ratio as a result of using CAT5e/
CAT6 cabling
• Retention of Full HD 1080p image and sound quality for
up to 60 metres
• Free from interruption due to solid metal, interference
free housing
HDMI Analyser
The XA-1 is the perfect analysis tool for AV installers
and integrators. This device allows the user to analyse
AV sources for resolution and EDID information whilst
also providing pattern generation and test functions for
identifying display capabilities. This small but advanced
HDMI analyser also supports the analysis and pattern
generation of 3D signals. This allows the user to check
compatibility between sources and displays and provides a
means of identifying system problems for troubleshooting.
Features:
• Supports v1.4 HDMI Audio Return Channel
(ARC) function
• Support timings include SD, HD up to 1080p, PC up to
WUXGA and 3D
• Analyse input source info-frame and output sink EDID
• Deep color video support up to 12-bits
• HD resolutions supported - 480i to 1080p + 1080p24fps
• PC resolutions supported - VGA to SXGA + WUXGA
• 3D modes supported - Frame Packing (720p@50/60,
1080p@24); Side-by-Side (half)(1080p@24/60,
720p@50/60); Top-and-Bottom (1080p@24/60,
720p@50/60)
• Provides 25 timings and 6 patterns
• OLED show Input / Output timing information
• Support input signal bypass,
digital video formats in Deep
Color Mode at up to 36
bits (12bits/color) and new
lossless compressed (Dolby
TrueHD, Dolby Digital Plus
and DTS-HD master Audio)
digital audio
• Supports internal pattern
audio LPCM 2CH 48/96/192KHz, LPCM5.1 48/96 kHz,
LPCM7.1 48/96KHz
Code MEG61 £80.10
NEW
116513_HDMI_Brochure_Aug_2013.indd 16 12/09/2013 09:16