Specifications

HDMI over CAT5
These products make a very affordable method of sending
HDMI over long distances whilst preserving the full HD
capability. The transmitter converts the HDMI signal into a
balanced differential signal and the receiver converts it back
into a conventional HDMI signal again. It uses two runs of
CAT5E (or CAT6) cable and allows for full auto-adjustment of
feedback and equalisation with no user-intervention required.
Long HDMI cables are expensive and unwieldy, whereas
CAT5E cable is cheap and flexible making it much more
suitable for long distance runs. The HDMIC50 can send HDMI
at full 1080p up to 50m (up to 100m at 480p!) They can also
be used for DVI-D signals with a suitable adaptor such as the
KA169. The HDMIC530 is rated at 1080p at 30m and 480p
at 60m.
Email your order to us at [e-mail]
12
Code HDMIC530 £39.99
Code HDMIC550 £59.99
HDMI Over Long Distances
More details on all products can be found online at...
Specifications:
• Input Video Signal: 0.5 -1.0 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
• Maximum Single Link Range:
1920X1200, 1080P
• Output Video: HDMI 1.3
• Video format supported:
DTV/HDTV 1080P/1080i/720P/
576P/480P/576i/480i
• Size: 45 x 25 x 81mm
• Power Consumption: 5W (max.)
• Operating Temperature: 0 to +70 C
• External Power Supply: 5V DC@2A
• HDMI V1.3 compliant
HDMI over Single CAT5
50M System. Some HDMI over CAT5 transmitters require two runs of CAT5 cable. This new item can do the same job with a
single run of CAT5 cable, great for adapting existing installations. The modules are plug and play with full auto-adjustment of
feedback and equalisation and no user-intervention required.
Specifications:
• Input Video Signal 0.5 -1.0 volts p-p
• Output Video HDMI 1.2a
• Video format supported
• DTV/HDTV 480i/576i/480p/576p/
720p/1080i/1080P
• Transmission distance
• CAT-6 cable 50M for1080p
• Operating Frequency
Code HDEX344 £99.00
Yet another really useful way to get HDMI from one place to
another, the PCE122 can send ultra high quality HDMI v1.3
over a single coaxial cable! (RG6 or RG59). It can send full
HD 1080P at up to 120M or 720P up to 230M, both with
full 7.1 channel audio. The conversion is fully digital (HDMI
to SDI and back again) with no additional compression and
gives you crystal clear HD at long distances. The PCE122
also contains a built-in 1 to 2 Coaxial Splitter to drive two
separate receivers and each receivers has a loop-through
to daisy chain additional receivers as required. Cables are
connected via BNC
for a secure, vibration
resistant connection.
Specifications:
• 120M HDMI 1080p video and 7.1channel audio One
Cable transmission with Ultra High Quality Video
• Features World Leading Single Coaxial Transmission,
designed to simplify Installation
• 1080p 120M / 720p 230M long distance Ultra
High Quality Video with 7.1 channels surround
sounds transmission
• Up to 7.1 channels audio, Dolby® Digital / Dolby®
TruHD/DTS®-HD pass-thru
• Built-in 1 to 2 Coaxial Splitter in Sender and One Coaxial
Cascade output in Receiver for great extension flexibility
• Support 5 layers Cascadable for up to 600M 1080p
video transmission and up to 10 TVs/Displays/
Projectors connected
• BNC connector designed for solid coaxial connection
• HDMI v1.3b, HDCP Compliant
• Hassle free plug-n-play, install in seconds
PCE122 with IR feedback:
Code PCE122IR (transmitter & receiver pair with IR) £542.61
Code PCE122RIR (additional receiver with IR) £315.70
HDMI over Single Coaxial Extender
• Video Amplifier Bandwidth 1.65Gpbs/165MHz
• Vertical Frequency Range 50/60Hz
• Resolutions(HDTV)
• Interlaced(50&60Hz) 480i,576i,1080i
• Progressive(50&60Hz) 480p,576p,720p,1080p
Please note, in order to achieve the quoted
transmission distances please use only
CAT-5e or CAT-6 cable.
116513_HDMI_Brochure_Aug_2013.indd 12 11/09/2013 14:27