Specifications

Find product information and data sheets on www.keene.co.uk
11
www.keene.co.uk
...So take a look now
HDMI Over Long Distances
HDMI over IP Network
As well as HDMI over (dedicated)Cat5 cable we can now offer
transmitter / receiver systems that will send HDMI signals via
an IP computer network. Amazingly they place very little load
on your network bandwidth an operate as a true multicast -
that is to say one transmitter can drive multiple receivers with
no extra network load! They really are extremely simple to
operate, just plug and play with no in-depth networking
capability required. They also provide full IR feedback allowing
remote control of source equipment. A flexible, scalable, low
cost solution to distributing HD signals to multiple displays.
They can be used in Extender Mode (connect the Sender to
the Receiver by CAT5e/6/7 cable directly) or Broadcaster
Mode (Sender to Receiver via LAN) for one Sender to
many Receivers.
PB5000P
Features:
• 1080p Ultra High Quality Video transmission and up to
16 Groups Multi-Casting
• Flexible and scalable HDMI 1080p broadcasting with
Gigabit Ethernet LAN
• 1 to 1, 1 to many & multi-casting broadcasting
architecture, adding more displays without adding
LAN bandwidth loading
• Multi-Casting group with Gigabit Ethernet managed
switch (required 802.11Q VLAN & IGMP function)
support, up to 16 multi-casting group support
• 16 sets C class IP Dip switch configuration on both Sender
& Receiver for easy Multi-Casting group matching
Specifications:
• Video Resolution:480i/p, 576i/p, 720p, 1080i/p
• Sender Connector:Power Adapter in, RJ45,
RS232, IR Emitter Connector, HDMI
• Receiver Connector:Power Adapter in, RJ45,
RS232, IR Receiver Connector, HDMI out
• HDMI Spec.:1.3 Compatible
• DVI Spec.:1.0 Compliant
• HDCP Spec.:1.2 Compliant
• Link Connector:RJ45
• Power Consumption:3.2W
• Audio System:Stereo L/R
• Audio Resolution:16bit 48Khz
• max CAT5 Cable Length:100M
• Power Adapter:DC 5V/2A
Code PB5000P Sender/Receiver pair £524.54
Code PB5000PR Additional receiver £394.62
NEW
PB5000P
The newly updated PB5000Plus units now provide IR feedback and RS232 control
and deliver stunning Ultra High Quality 1080p HDMI Video broadcast over IP network.
Via an inexpensive Gigabit Ethernet network switch the PB5000P can support Point to Point, Point to
Many Broadcasting, and Multi-Casting which multiple video sources with PB5000+ Senders video streaming to multiple TVs/
Displays/Projectors with PB5000+ Receiver. Multi-casting can be done by Managed Gigabit Switch with 802.1Q VLAN function
which provide control remotely and allows more video source/senders to be integrated.
PB5000P
• IR Pass-Thru on 1 to 1 extender configuration
• Up to 16 Groups Multi-Casting
• IR Control Pass Thru
• Two Way RS-232 Command Unicast Broadcast for
control from remote site
• Easy Dip Switch Matching for Multi-Casting
Group configuration
• New EDID Copy/Video Mode Switching Button for
Optimal Video Performance
• Video Wall function support for up to 8x16 displays
by Easy Web Interface Configuration
• Optional PoE support upon request
116513_HDMI_Brochure_Aug_2013.indd 11 12/09/2013 09:16