Specifications

Command desCription
R AUDIO MUTE Reports the numeric equivalent for the AUDIO
MUTE setting (as above)
S HDMI AUDIO 0/1 0=AUTO 1=EXT
R HDMI AUDIO Reports the numeric equivalent for HDMI
AUDIO setting (as above)
S KEY LOCK 0/1 0=ENABLE 1=DISABLE
R KEY LOCK Reports the numeric equivalent for KEY LOCK
setting (as above)
S FREERUNCOLOR 0/1 Sets the Free run colour (0=Black, 1=Blue)
R FREERUNCOLOR Reports the numerical equivilent for the free
run colour setting (as above)
S RESET 1 Setups the numerical equivalent for RESET
setting (as left)
PORT 0~8
0=
LAST MEMORY
1=
HDMI 1
2=
HDMI 2
3=
HDMI 3
4=
YPbPr
5=VIDEO
6=PC 1
7=PC 2
8=PC 3
ST Checks the FIRMWARE version and SOURCE
information:
0.00~x.xx
SOURCE: HDMI ~ PC3
PORT ON: LAST ~ PC3
VOL + Raises the volume level (VOLUME * IS SET)
VOL - Lowers the volume level (VOLUME * IS SET)
QUIT EXIT (Telnet only)
Note:
1. Resolution settings 0~13 are RGB encoded. Resolution settings 14~21 are
YUV encoded.
2. RS-232 commands will be not executed unless followed with a carriage
return (CR) command and for some systems a Line feed (LF) command.
Commands are case-insensitive.