Specifications
10
5
CONTROL:
This port is the link for Telnet or Web GUI controls, connect to an active
Ethernet link with an RJ45 terminated cable.
6
POWER:
Switch this power toggle to turn on and activate the device or to turn
o to shut it down.
7
DC 5V:
Plug the power adaptor included in the package and connect it to the
AC wall outlet for power supply.
6.3 Remote Control
1
POWER: Press this button to switch
ON or set the device to standby
mode. Once the device is connected
with power supply.
2
HDMI1~3/PC1~3/CV/COMP: Press
these hot keys to switch input source
instantly.
3
EXIT: Press this button to exit the
menu or the current selection under
OSD.
4
MENU: Press this button to enter into
the OSD menu.
5
RESET: Press this button to set the
device back into the factory default
setting.
6
AUTO ADJUST: Press this button
when output image is not tting the
display's screen perfectly. The device
will auto adjust the image to full
screen.
7
OK &
▲▼◄►
: Press OK to conrm the selection or press the arrow
buttons to scrolled in the OSD selections.
CR-122
POWER
PC1 PC2 PC3
CV COMP
EXIT MENU
OK
RESET
AUTO
ADJUST
3
5
1
4
6
7
2
HDMI2HDMI1 HDMI3