Specifications

13
S AUDIODELAY 0~3 Audio delay setting OFF(0) / 40ms (1) / 110ms(2) /
150ms(3)
R AUDIODELAY Inquire audio delay setting
S AUDIOMUTE 0/1 Audio mute setting ON(0) / MUTE(1)
R AUDIOMUTE Inquire audio mute setting
S KEY LOCK 0/1 Key lock setting ENABLE(0) / DISABLE(1)
R KEY LOCK Inquire key lock setting
S RESET 1 Pre-reset
S POWER 0/1 Firmware checking OFF(0) / ON(1)
R POWER Request power status
PORT (0~8) Set active port
when repower on
LAST MEMORY(0) /
HDMI(1) / HDMI2(2) /
HDMI3(3) / YPBPR(4) /
VIDEO (5) / PC(6) / PC2(7)
/ PC3(8)
ST FW vers. & source info. 0.00~x.xx
SOURCE: HDMI ~ PC3
PORT ON:LAST ~ PC3
EXIT Exit
Note: iJL command must rst be insert before starting using RS-232
command to control the device. This command is CASE-SENSITIVE.
Other RS-232 command will be not executed unless followed with a
carriage return + LF and commands are case-insensitive.