Specifications

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEX
SHENYANG MACHINE TOOL CO., LTD 2
1.3 Major Applications of the Machine
The machine is mainly used for turning various shaft-type workpieces and disc workpieces,
cutting all kinds of threads, arcs, cones and internal and external curvic surfaces of
gyro-rotors, and it can meet the need of speed while cutting ferrous and non-ferrous metals
at high speed. Therefore, the machine is suitable for of gyro-rotor workpieces in
high-efficiency, large-batch and high-accuracy machining in the fields of automobile,
motorcycle, electronic, aerospace, war industry, etc. The workpieces produced on the
machine can be up to the working accuracy of Grade IT6~IT7 and Cp can be up to 1.6
1.4 Accuracy of the Machine
Accuracy of the machine is in accordance with Standard JB/T8324.1-1996
《Testing of the
Accuracy for Horizontal NC Turning Machines
》.
1.5 Working Environment of the Machine
The machine is to be used in following environment and operating conditions:
 Environmental temperature: 5 C ~ 40C.
 Humidity: When under the max. temperature of 40C, the relative humidity shall not
be over the range of 50%, and the principle of humidity change is that no
condensation results in.
 Height above sea level: Lower than 1000 m.
 Atmosphere: There is no excessive dust, acid gas, corrosive gas and salt
component.
 Radiation: It is necessary to avoid temperature rising of environment due to direct
lighting up of the sun for the machine or heat radiation.
 Location for installation of the machine should be far away from vibrating source,
flammable and hazard articles.
1.6 Effect of the Machine to the Environment
The sound-pressure grade of noise from the machine is ≤ 83dB(A). The machine is
provided with full guard and does not drain harmful gas or liquid. Therefore, there is no
bad affection from the machine to the environment.