Specifications

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEX
SHENYANG MACHINE TOOL CO., LTD 1
1 GENERAL DESCRIPTION
1.1 Application Scope and Purpose of the Instruction Book
The Instruction Book is edited for the CNC lathes provided with FANUC 0i-Mate-TC,
SMTCL-NC100, DASEN-3g, GUANGZHOU NC System, CHENGDU GUANGTAI NC
System, FAGOR 8055T, SIEMENS 802D, WUHAN HUAZHONG CENTURY STAR
HNC-22T,GJ-201T, etc.
The Chapter 2 of the Instruction Book“Matters Needing Attention to Safety Protection”
can be taken as routine inspection items of operators.
The Chapter 3 of the Instruction BookHandling and Installation of the Machine,
explains matters needing attention and the methods for installing the machine.
The Chapter 4 of the Instruction BookSpecifications of the Machine”, and Chapter 5
“Construction of the Machine”, describe the content needing pre-comprehension before
operation.
The Chapter 7 of the Instruction BookInspection and Maintenance, is the knowledge
needed for operation and maintenance for operators.
In Chapter 8 of the Instruction Book “Tool Disposition” submits machining range of the
machine, tool interference, etc.
If any trouble that is not mentioned in the Instruction Book occurs, please make contact
with the Market Department of our factory.
1.2 Identification Marking of Model
The model identification markings of model of the machines consist of Code of
construction character, 1/10 of max. swing diameter over bed, 1/10 of max. turning length,
model of control system and safeguard type and max. length of workpiece to be turned.
For the machines provided with FANUC 0i-Mate-TC, SMTCL-NC100, DASEN-3g,
GUANGZHOU NC System, CHENGDU GUANGTAI NC System, FAGOR 8055T,
SIEMENS 802D, WUHAN HUAZHONG CENTURY STAR HNC-22T, GJ-201T,etc., the
code of the system are separately d, b, bgj, n, t, f, g, e, s. In addition, the machines can be
divided into four kinds according to max. turning length600, 850,1350 and 1860, two
seriesi and j , according to safeguard types and four size according to the max length of
workpiece to be turned640, 890, 1390 and 1900.
C A K 50 85 di × 890
Max. length of workpiece to be turned
Model of control system and safeguard type
1/10 of max. turning length
1/10 of max. swing diameter over bed
NC
Code of construction character
Lathe