Specifications

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEX
SHENYANG MACHINE TOOL CO., LTD 62
8 TOOL DISPOSITION
Max length of workpiece of the machine means the distance between the two centers.
When 6-station turret is used in tailstock, the distance from turret center to the chuck
endface
：890 mm size  900 mm.
Tool rods and tool holders shown by Fig. 15 are only the part of tool rods and holders
supplied by our factory for users without special order. These tool rods and holders may
not meet the needs for special turning of workpieces and we have not considered tool
interference while turning workpieces in practice, so some sizes given by Fig.15 are only
reference for users.
User should design required tool rods and tool holders while turning specific workpieces
according to the sizes given by Fig. 15. For details of tool interference diagram and related
limitation sizes, refer to Fig14-1, Fig.14, Fig. 15 and Fig. 16, please.
Fig. 14-1 Diagram for limitation-turning-size of
vertical 4-station turret