Specifications

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEX
SHENYANG MACHINE TOOL CO., LTD 52
7 INSPECTION AND MAINTENANCE
7.1 Routine Inspection
Routine Inspection
No. Inspected Position Inspected Item Remarks
1
Oil gauge for
lubricating
p
osition
 Check if the oil is enough.
 Check if the oil is polluted obviously.
Add oil when it is not
enough
2 Level of coolant
 Check if level of the coolant is
proper.
 Check if the coolant is polluted
obviously.
 Check if the filter of the oil pan is
b
locked.
Add coolant when
necessary
3 Guideways
 Check if the lubricant is enough.
 Check if the chip scraper is damaged.
4 Pressure gauge  Check if the pressure is sufficient. Refer to section 5.2.6.
5 V-belt
 Check if the tension is suitable.
 Check if the surface of belt has any
b
reak or scratch.
6
Pipe, appearance
of the machine
 Check if there is any oil leakage.
 Check if there is any coolant leakage.
7 Movable parts
 Check if there is any noise or
vibration.
 Check if the movement is smooth and
normal.
8 Operator’s panel
 Check if the functions of the levers
and switches are normal.
 Check if there is an
y
alarm.
9 Safety devices  Check if they work normally.
10 Cooling fan
 Check if the fans on the cabinet and
the bed work normally.
11
Outside wires and
cables
 Check if there is any wire broken.
 Check if any insulated cover has been
dama
g
ed.
12
Motors, gear box
and other rotary
devices
 Check if there is any noise or
vibration.
 Check if there is any abnormal heat
u
p
.
13 Cleaning
 Clean the surface of chuck, cover of
the carriage guideways and chip
g
uard screen and clean out the chi
p
s.
Clean them after
work
14
Lubrication of
the chuck
 Lubricate main jaws by grease. Once a week
15
Machining
operation of the
machine
 Check whether
t
he machining
accuracy of the machine is kept
within the s
p
ecifications.