Specifications

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TE

SHENYANG MACHINE TOOL CO., LTD 51

due to the special design of control circuits; and those which are under the “stop”

status will not enter into the “starting” status, guaranteeing the safety of the machine.

In addition, the control programs in the computer of the machine are solidified in the

chip, and the machining programs are protected by the power supply of the battery,

therefore, the program menu stored in the computer will not lose while power off by

accident or self-troubles occur.

 The alarm device and E-stop button provided with the machine can prevent the

machine from damages resulting from sudden troubles. Because of the reasonable

design of softwares, alarms can be displayed in the form of letters or alarm signals,

and indicated by indicating light on the operator’s panel. According to different

conditions, the treatment of the machine to the alarms can be divided into three

forms: “E-stop” to emergency alarm; “feed hold” for common alarm; only “prompt”

for fault operation.

6.3 Set Necessary Warn Labels for Safety

Although a series of protection measures have been taken for the machine, some

potential, unobvious dangers still exist. Therefore, in order to prompt the operator, the

machine is provided with necessary warn labels for safety. The warn labels for safety as

follows:

Labels of safety explanation, safety warn, tailstock schematic, spindle safety, turret

safety, limit speed of spindle and electric shock.