Specifications

CAK50/CAK61 SERIES MATTERS NEEDING ATTENTION TO INSTALLATION

SHENYANG MACHINE TOOL CO., LTD

MATTERS NEEDING ATTENTION TO INSTALLATION

In order to ensure the machine run normally, the following items during installation of the

machine must be paid attention：

1 Wiring

1.1 The performance values of wire used for connecting the electrical parts should be

equal to or more than the specified values.

1.2 Never connect the power cable like electrical welder, high-freq. Quencher, etc. which

may cause interference to the switchboard.

1.3 Power cable should be connected by skilled electrician。

2 Earthing

For cross section of the used earthing wire, earthing resistor，and matters needing attention

to earthing, please refer to standard GB5226.1-2002.

The earthing wire should be connected as shown by figures given below.

Separate earthing wire

Common earthing wire

Never connect several equipment to one earthing rod as the figure shown below:

machine