Specifications

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TE
X
SHENYANG MACHINE TOOL CO., LTD 18
4 SPECIFICATIONS OF THE MACHINE
4.1 Explanation to the Specification
This machine has some different sizes and types. Before read the manual, make sure the
type of your machine.
Note: The parameters not specially stated in this operation manual are parameters of
standard configuration of the machine.
4.2 Table of Technical Specifications
Item Unit Specification
Max. swing dia. over bed mm 500 610
Max. length of workpiece to be turned mm 640， 890， 1390，1900
Max. turning dia. mm 500 610
Max. turning length mm 600，850，1350，1860
Max. turning dia. over carriage mm 300 370
Type and code of spindle nose D8， A
2
8
Front taper hole of the spindle 1：20
Dia. of spindle bore mm 70
Range of spindle speed（common） r/min 40~1800
Range of spindle speed（manual speed changing
and frequency changing）
r/min 72~370；300~900；800~2200
Range of spindle speed（auto speed changing
and frequency changing）
r/min 22~220；71~710；215~2200
Steps of spindle speed (common) 12 steps
Steps of spindle speed (freq.-changing) 3 steps, stepless
Output power of mtr. for spdl.
(Common) kW 6.5/8
(Freq.-changing) kW 11（manual ） 7.5/11（auto）
Center height
From the bed mm 250 305
From the floor mm 1130 1185
Rapid speed of X-axis m/min 4
Rapid speed of Z-axis m/min 8 6
X-axis travel mm 250 305
Z-axis travel mm 640 890 1390 1900
Dia. of tailstock sleeve mm 75
Travel of tailstock sleeve mm 150
Taper of tailstock sleeve Morse No. 5 (hydraulic tailstock: Morse No. 4)