Specifications

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TEX
SHENYANG MACHINE TOOL CO., LTD 9
 During the period of maintenance, anyone who has no relationship with the
maintenance should not operate the main circuit switch or the power ON switch
on the pendant, therefore a sign plate with “The machine is under maintaining,
don’t touch the switch” or with words similar to the above meaning should be
hung on the switch or other suitable places. This plate should be easy to see and
to pick off but uneasy to fall down.
 It’s dangerous to maintain the machine with power on, principally the switch of
main circuit should be turn off during maintenance.
Warn：
 A professional maintainer should carry out the electric maintenance and the
maintainer should always be in contact with the chief, and never make any
decision by himself.
 Travel limit device, approach switch or interlock devices cannot be dismounted
or modified.
 In order to ensure the safety, the ladder or the lifter used for high-altitude work
must be maintained and controlled every day.
 Fuses and cables used for the machine should be certificated products.
2.14 Handling after Maintenance
Warn:
 After maintenance is finished, the working place should be cleaned and
re-arranged, and the oil, water on every part should be cleared away to get a
good working ambience.
 Take the dismounted parts and dirty oil far away from the machine to keep
safety.
Notice：
 Maintainer should check if the operation of the machine is safe.
 Register and keep all the data of maintenance and inspection for further
reference.
2.15 Miscellaneous
 Max. allowed loading of the machine (standard configuration):
For FANUC 0i control system
Power: 8 kW 7.5 kW (frequency-changing motor)
Torque:
1318 Nm 840 Nm (frequency-changing motor)