Specifications

5
8. Remote Control
①
Power button: Press to switch On the device,
press it again to set the device in standby mode.
②
1~4: Press the desire input button to select the
input source.
2
1
9. RS-232 Protocol
9.1PinDenition
CPRO-3D42S Remote Control Console
PIN Denition
►
◄
PIN Denition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 9600bps
Data bit: 8bits
Parity: None
Stop bit: 1 bit
Flow Control: None
9.2Command
Command Action
POWER 00 Power Off (standby)
POWER 01 Power On
PORT 11 Output Select Input 1
PORT 12 Output Select Input 2
PORT 13 Output Select Input 3
PORT 14 Output Select Input 4
PORT 21 Output Select Input 1
PORT 22 Output Select Input 2
PORT 23 Output Select Input 3
PORT 24 Output Select Input 4