Specifications
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
RETNEUNEMIVDCPVSVCREWOP
-
+
DIGITAL VIDEO SCALER CP-255ID
XGA
720P
1 2 4 53
1
POWER & LED: Press this button to switch the device ON or to put
the device into standby mode. When the device is connected to an
active power supply the LED will illuminate and the device will switch
ON automatically.
2
IR (IR window): Receives only the IR signal from the supplied remote
control.
3
INPUT button and LEDs (CV/SV/PC/DVI):
Press to directly select the required input. An LED will illuminate to
indicate the currently selected source.
4
MENU: Press this button to enter into the on-screen menu (OSD).
5
−/+ (Minus/Plus): Use these buttons to navigate down and up in the
on-screen menu.
6
ENTER: Press this button to conrm the selection.
Note:
Pressing '−' (MINUS) and ENTER simultaneously will immediately switch
the output resolution of the device to 720p60.
Pressing '+' (PLUS) and ENTER simultaneously will immediately switch the
output resolution of the device to XGA.