Specifications

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panels
POWER LOCK
MENU OUTA
1
B
2
C
3
D
4
IN
E
5
F
6
G
7
H
8
2 3 4 5 61
1
LCD Display: Displays the setting information of each input and
output selection.
2
Power button LED: Press this button to power the device on/o.
The LED will illuminate green when the power is on, red when it is in
'Standby' mode.
3
LOCK: Press this button to lock all the buttons on the panel, press
again to unlock. The LED will illuminate green when locked.
4
IR: IR Receiver window (accepts the remote control signal of this
device only).
5
MENU: Press this button to change the EDID setting from STD (internal)
1 to TV (external) 2 , press it again to conrm the selection.
6
1~8/A~H and Out/In button: Press the Out or In button to select the
output or input mode then press the required number button to make
the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2 then the following sequence of button
presses need to be performed
Press: Out

A

B

C

D

In

1

Menu,
and then press: Out

E

F

G

H

In

2

Menu.
Note: If the menu button is not pressed the selection will not be changed.