PU-8H8HBT 8 x 8 HDMI HDBaseT™ Matrix (inc.
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������6 2. Applications �������������������������������������������6 3. Package Contents ����������������������������������6 4. System Requirements ���������������������������6 5. Features ��������������������������������������������������7 6. Operation Controls and Functions �������8 6.1 Front Panels ������������������������������������������������� 8 6.2 Rear Panels ��������������������������������������������������� 9 6.
1. INTRODUCTION s the Flagship 8x8 HDBaseT™ Matrix, the PU-8H8HBT solution offers A complete HDBaseT™ convergence. Installers can switch and distribute up to 8 HDMI sources, RS-232, 2-Way IR, and PoE to lengths of up to 100m using CAT5e/6 cable infrastructure. This single box solution will enable an installer to confidently integrate an eight zone multi-room AV system.
5. FEATURES Supports all v1.3 HDMI resolutions Supports uncompressed video/audio up to 10.2Gbps Common supported resolutions: HDTV: 480p, 576p, 720p, 1080i, 1080p, 1080p24; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA. HDMI, HDCP and DVI complaint High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz) Uncompressed data transfer over single CAT cable (100m - CAT6; 80m CAT5e) Supports HDMI input up to 15m 1080p 8bit or 10m 1080p 12bit.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panels MENU POWER 1 2 A 1 B 2 C 3 D 4 OUT E 5 F 6 G 7 H 8 IN LOCK 3 4 5 6 1 LCD Display: Displays the setting information of each input and output selection. 2 Power button LED: Press this button to power the device on/off. The LED will illuminate green when the power is on, red when it is in 'Standby' mode. 3 LOCK: Press this button to lock all the buttons on the panel, press again to unlock. The LED will illuminate green when locked.
6.2 Rear Panels 3 6 9 V+ ALL IR OUT IR OUT A IR OUT IR IN B IR OUT IR IN IR IN C IR OUT CAT5e/6 OUT CAT5e/6 OUT CAT5e/6 OUT LAN IR IN D IR OUT CAT5e/6 OUT IR IN E IR OUT CAT5e/6 OUT IR IN F IR OUT CAT5e/6 OUT IR IN G IR OUT CAT5e/6 OUT IR IN H GND CAT5e/6 OUT GND 3 4 1 2 V+ GND POE 24V IR IN RS232 SERVICE 1 HDMI IN 1 2 4 5 7 2 HDMI IN 3 HDMI IN 4 HDMI IN 5 HDMI IN 8 6 HDMI IN 7 HDMI IN 8 HDMI IN MAIN 24V 10 11 1 LAN: Reserved.
6.3 Side Panel 1 1 Fan Ventilator: These are air ventilation areas, DO NOT block these areas or cover it with any object. Please allow adequate space around the unit for air circulation 6.4 Remote Control 1 Power: Press this button to switch on the device or set it to standby mode. 1 2 IN: Input ports selection 1~8. 3 OUT: Output ports selection A~H.
6.
6.
6.7 RS-232 Commands Command (Case Sensitive) Description A1~A8 Switch output A to 1~8 B1~B8 Switch output B to 1~8 C1~C8 Switch output C to 1~8 D1~D8 Switch output D to 1~8 E1~E8 Switch output E to 1~8 F1~F8 Switch output F to 1~8 G1~G8 Switch output G to 1~8 H1~H8 Switch output H to 1~8 ABCD...1~ABCD...8 Switch output ABCD...
7.
ZONE E ZONE F ZONE G ZONE H Displays HDMI Outputs IR Out/In RX Power RX Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In RX Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In RX Power Link IR 2 IR 1 Extender Blaster RS232 Out CAT5e/6 In Receiver Units Single CAT 5e/6 Cable V+ IR OUT F IR OUT CAT5e/6 OUT IR IN G IR OUT CAT5e/6 OUT IR IN H GND CAT5e/6 OUT GND 3 4 1 2 V+ GND POE 24V IR IN Power S
8. SPECIFICATIONS Max. TMDS Bandwidth 6.75 Gbps Input Ports 8×HDMI, 9×IR Extender, 1×RS-232, 1×Mini USB-B type(for firmware update only) Output Ports 8×CAT5e/6/7, 9×IR Blaster ESD Protection Human body model: ± 8kV (Air-gap discharge) ± 4kV (Contact discharge) Power Supply 24 V/6.
9.
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.
