OR-HD88HC v1.4 HDMI 8 x 8 Matrix Switcher with simultaneous HDMI & CAT Outputs (inc.
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������6 2. Applications �������������������������������������������6 3. Package Contents ����������������������������������6 4. System Requirements ���������������������������6 5. Features ��������������������������������������������������7 6. Operation Controls and Functions �������8 6.1 Front Panel ��������������������������������������������������� 8 6.2 Rear Panel ����������������������������������������������������� 9 6.
1. INTRODUCTION T he OR-HD88HC Matrix Switcher connects eight HDMI sources to 16 displays. This matrix features 8 HDMI outputs and each HDMI output is mirrored to provide a Twin CAT output which runs simultaneously. Connect a PU-1106RX Receiver to each of the Twin CAT outputs to extend the HDMI signal up to 45m for multi-room connectivity.This matrix switcher can be controlled via the supplied IR Remote Control, RS-232, or by using the selection buttons on the front of the unit.
5. FEATURES HDMI, HDCP 1.1, DVI 1.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel MENU POWER 8X8 HDMI MATRIX CMSI-8H8HC 1 2 A 1 B 2 C 3 D 4 OUT E 5 F 6 G 7 H 8 IN LOCK 3 4 5 6 1 LCM Display: Displays the setting information of each input and output selection. 2 Power Button LED: Press this button to power the device on/off. The LED will illuminate green when the power is on, red when it is in 'Standby' mode. 3 LOCK: Press this button to lock all the buttons on the panel, press again to unlock.
6.2 Rear Panel 3 5 6 OUTPUT A DDC IR LAN HDMI IR IN RS232 OUTPUT B DDC IR VIDEO HDMI OUTPUT C DDC IR VIDEO HDMI OUTPUT D DDC IR VIDEO HDMI OUTPUT E DDC IR VIDEO HDMI OUTPUT F DDC IR VIDEO HDMI OUTPUT G DDC IR VIDEO HDMI OUTPUT H DDC IR VIDEO HDMI SERVICE VIDEO GND GND V+ 2 1 4 3 +V GND 1 HDMI IN 1 2 4 7 2 HDMI IN 3 HDMI IN 4 HDMI IN 5 HDMI IN 6 HDMI IN 7 HDMI IN 8 HDMI IN DC 24V 8 9 1 LAN: Reserved.
6.3 Side Panel 1 1 Fan Ventilator: These are air ventilation areas, DO NOT block these areas or cover it with any object. Please allow adequate space around the unit for air circulation 6.4 Remote Control 1 2 3 1 POWER: Press this button to switch on the device or set it to standby mode. 2 IN: Input ports selection 1~8. 3 OUT: 10 Output ports selection A~H.
6.
6.
6.7 RS-232 Commands Command Description A1~A8 Switch output A to 1~8 B1~B8 Switch output B to 1~8 C1~C8 Switch output C to 1~8 D1~D8 Switch output D to 1~8 E1~E8 Switch output E to 1~8 F1~F8 Switch output F to 1~8 G1~G8 Switch output G to 1~8 H1~H8 Switch output H to 1~8 ABCD...1~ABCD...8 Switch output ABCD...
7. CONNECTION DIAGRAM ZONE A 60° ZONE C ZONE B 7m RX VIDEO CAT6 INPUT DDC RX VIDEO CAT6 INPUT DDC RX VIDEO IR LAN IR IN RS232 60° ZONE A ZONE C ZONE B 14 ZONE D RX DDC CAT6 INPUT OUTPUT A DDC 60° 7m 1.
ZONE E RX PUT E DDC VIDEO CAT6 INPUT VIDEO RX DDC OUTPUT F DDC IR HDMI ZONE F OUTPUT G DDC IR VIDEO HDMI VIDEO CAT6 INPUT DDC ZONE G RX VIDEO CAT6 INPUT ZONE H RX DDC VIDEO CAT6 INPUT DDC OUTPUT H DDC IR VIDEO HDMI VIDEO GND GND V+ 2 1 4 3 +V GND 6 HDMI IN 7 HDMI IN 8 HDMI IN 6 7 8 DC 24V ZONE G ZONE E ZONE F ZONE H 15
8. SPECIFICATIONS Video Bandwidth 255 MHz/6.75 Gbps Input Ports 8×HDMI, 1×IR Extender, 1×RS-232, 1×Mini USB-B type(for firmware update only) Output Ports 8×Dual CAT6, 8×IR Blaster, 8×HDMI HDMI Input Cable Distance 15M/8-bits, 10M/12-bits HDMI Output Cable Distance 15M/8-bits, 15M/12-bits CAT6 Output Cable Distance 45M/8-bits ESD Protection Human body model: ± 8kV (Air-gap discharge) ± 4kV (Contact discharge) Power Supply 24 V/6.
9.
CIE-Group Ltd, Widdowson Close, Blenheim Industrial Estate, Bulwell, Nottingham NG6 8WB Tel: +44 (0)115 977 0075 | Fax: +44 (0)115 977 0081 Email: info@cie-group.com www.cie-group.
