Specifications

7
6.4 RS-232 & Telnet Command
HELP: Show Command list.
Command Description
P0 Power Off
P1 Power On
RESET System Reset to
O1I1,O2I2,O3I3,O4I4,O5I5.... Reset
IPCONFIG Display the current IP cong
SETIP <IP> <SubNet> <GW> Setting IP.Sbunet.GGateWay (Static IP)
RSTIP IP Conguration Was Reset To Factory
Defaults(DHCP)
OxxIxx(x:01~32) Output 1~32 set to Input 1~32
ALLOUT xx(x:01~32) All Output set to Input 1~32
MUTE xx(x:01~32) Video mute command at output
interface
UNMUTE xx(x:01~32) Video unmute command at output
interface
HPDLOW xx(x:01~32) Pull the Hot-Plug-Detect signal to 'LOW'
HPDHIGH xx(x:01~32) Pull the Hot-Plug-Detect signal to 'HIGH'
STATUSIN xx(x:01~32)
Report Input connection status
STATUSOUT xx(x:01~32)
Report Output connection status
STATUSALL Report ALL Output connection status
STATUSEDID Report ALL INPUT EDID mode&port
SETEDIDMODE ii
mm(ii:01~32 mm:0~2)
set EDID mode(mm)to Input(ii)
SETEDIDPORT ii pp(ii:01~32
pp:01~32)
Set EDID Assigned Port(PP) to Input(ii)
ACTIVE Report I/O active channels
INDETECT Input channels detect indicator
OUTDETECT Output channels detect indicator