CMSI-3232/1616/88 HDMI Matrix Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 2 6. Operation Controls and Functions ������� 3 6.1 Front Panel ����������������������������������������3 6.2 Rear Panel �����������������������������������������5 6.
1. INTRODUCTION The Modularized HDMI Matrix series can route the signal of 32, 16 or 8 sources to any connected 32, 16 or 8 displays, providing resolution up to Full HD 1080p and WUXGA (1920x1200@60HzRB).
5. FEATURES • HDMI, HDCP 1.1 and DVI 1.0 compliant • Changeable input and output board • Input and output module types can be mixed and added in increment of 8 from 8x8 up to 32x32 with HDMI, DVI and CAT5e/6/7 interfaces • Supports LPCM 7.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel 1 3 R: STANDBY FLASH: ALERT POWER RETURN 7 8 9 LOCK MENU 4 5 6 SAVE 1 2 3 RECALL OUT/IN 0 + ENTER 2 10 PAGE 5 11 4 12 PAGE ALL 13 6 8 7 9 1 LCM: Displays the setting information of each input and output and other setting information according to the selection. 2 POWER & LED: This LED will illuminate when the power is in standby mode.
3. Manual EDID: Support independent EDID by appoint input and output ports. B. IP 1. IP address, 2. Netmask, 3. Gateway. C. Temperature 1. Temperature 1, 2. Temperature 2, these figures shows the temperature of the device inside. 6 ALL: Press this button to select all outputs with one input. 7 0~9: Press these numbers when selecting input output ports. 8 OUT/IN: Press this button to select input source to displaying on output display.
6.2 Rear Panel 100-240VAC 50/60 Hz OUTPUT 1 8 9 16 17 24 1 25 32 RS232 2 ETHERNET IR IN USB OUTPUT 0 CPU INPUT 1 8 9 16 17 24 25 32 3 4 5 1 OUTPUT 1~32: Connect HD/3D display TV/monitor with HDMI cables up to 32 displays. 2 CPU a. USB: This port is reserved for firmware update only. b. IR IN: Reserved. c. ETHERNET: Connect to an active network line for LAN serving and Telnet/Web GUI control. d.
6.
6.4 RS-232 & Telnet Command HELP: Show Command list. Command Description P0 Power Off P1 Power On RESET System Reset to O1I1,O2I2,O3I3,O4I4,O5I5.... Reset IPCONFIG Display the current IP config SETIP Setting IP.Sbunet.
SHOWMUTE SETIPADDR Show mute ststus of all output(0=not muted,1=muted Setting iIP address SETSNMASK Setting subned mask SETWADDR Setting gateway IP address RDIPADDR Display the current IP address RDSNMASK Display the current subnet mask RDGWADDR Display the current gateway IP address Q Display controller firmware version Note: All the RS-232 command will be not executed unless followed with a carriage return.
7.
8. SPECIFICATIONS Video Bandwidth 225MHz/6.75Gbps Input ports 32/16/8 x HDMI or DVI or CAT5e/6/7 Output port 32/16/8 x HDMI or DVI or CAT5e/6/7 Power Supply 2 x AC 110~240V (US/EU standards, CE/ FCC/UL certified)*3232 & 1616 1x AC 110~240V (US/EU standards, CE/ FCC/UL certified)*88 HMDI Cable I/O Distance 15m/8-bit I/O, 10m/12-bit I/O Dimensions (mm) 482(W) x 369(D) x 226(H) 3232 482(W) x 388(D) x 144.
9.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.
