OR-DVI88SA 8 x 8 DVI Matrix with Audio OPERATIONS MANUAL
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������6 2. Applications �������������������������������������������6 3. Package Contents ����������������������������������6 4. System Requirements ���������������������������6 5. Features ��������������������������������������������������7 6.1 Front Panel ��������������������������������������������������� 8 6.2 Rear Panel ����������������������������������������������������� 9 6.
1. INTRODUCTION T he OR-DVI88S Matrix Switcher connects eight DVI sources to eight displays allowing any source to be independently displayed on any screen connected to the DVI matrix outputs. This matrix switcher can be controlled via the supplied IR Remote Control, RS-232, or by using the selection buttons on the front of the unit. This device provides Audio functionality, 'Deep Colour' support and 3D signal compatibility (3D supported on HDMI cable using HDMI to DVI adaptor). 2.
5. FEATURES Resolutions supported: PC - VGA to WUXGA; HDTV - 480i to 1080p plus 1080p24fps. Supports DVI input up to 15m with 8bit Colour depth or 10m with 12bit Colour depth. Input is Compensated, Clock / Phase Adjusted, and Jitter Eliminated RS-232 and IR Remote Control, plus IR extender Supports Audio Supports 'Deep Colour' (10 & 12 bit). Selectable EDID settings - TV (downstream) and STD (fixed). 2U Rack Mount design Supports 3D signals (HDMI to DVI adaptor cable required).
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel MENU POWER 8X8 DVI MATRIX CMSI-8D8DSA 1 2 A 1 B 2 C 3 D 4 OUT E 5 F 6 G 7 H 8 IN LOCK 3 4 5 6 1 LCM: This monitor displays your setting information with each input and output selection. 2 POWER button & LED: Press this button to turn on the device and the green LED will illuminate when the power is on. When the LED illuminate in red it is in standby mode 3 LOCK button & LED: Press this button to lock all the buttons on the panel.
6.2 Rear Panel AUDIO OUT A B C D E F G AUDIO IN 1 2 3 4 5 6 7 LAN IR IN A B C D DVI OUT E F F H 8 G GND V+ RS232 SERVICE 1 2 3 4 DVI OUT GND 2 1 4 3 +V GND 5 6 7 8 DVI IN 1 2 3 4 5 6 7 1 LAN: Reserved. 2 RS-232: This slot is to connect with D-Sub 9pin cable from the PC/NB device for RS-232 control. 3 IR-IN: This slot is to connect with the IR extender included in the package for IR signal receiving from the remote control of this device.
6.3 Side Panel 1 1 VENTILATOR: These are fan ventilator area, DO NOT block these area or cover it with any object. 6.4 Remote Control 1 Power: Press this button to switch on the device or set it to standby mode. 2 IN: Input ports selection 1~8. 3 OUT: Output ports selection A~H.
6.
6.6 RS-232 Commands Command Description A1~A8 Switch output A to 1~8 B1~B8 Switch output B to 1~8 C1~C8 Switch output C to 1~8 D1~D8 Switch output D to 1~8 E1~E8 Switch output E to 1~8 F1~F8 Switch output F to 1~8 G1~G8 Switch output G to 1~8 H1~H8 Switch output H to 1~8 ABCD...1~ABCD...8 Switch output ABCD...
7. SPECIFICATIONS Video Bandwidth 225MHz/6.75 Gbps Input Ports 8 x DVI, 8 x 3.5mm Phone Jack 1 x IR, 1 x RS-232, 1 x mini USB B type (for firmware update only), 1 x RJ-45 (LAN) Output Ports 8 x DVI , 8 x 3.5mm Phone Jack ESD Protection Human body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge) Power Supply 24V/6.
8.
9.
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.
