CMPRO-4H4H/4H2H 4 by 4/4 by 2 HDMI Matrix Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 1 6. Operation Controls and Functions ������� 2 6.1 Front Panel ����������������������������������������2 6.2 Rear Panel �����������������������������������������3 6.
1. INTRODUCTION The 4 by 4/4 by 2 HDMI matrix with 4kx2k supported which allows HDMI signal from any of its four sources to be routed to and displayed on any of its four/two connected HDMI displays simultaneously. It supports 3D, 3Gbps bandwidth, 12-bit Deep Color, Hi-Def lossless audio and other features defined by HDMI specifications. The management of source/ sink scenarios can be operated easily through on-panel buttons, IR remote control, RS-232 or Ethernet controls. 2.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel POWER EDID A B C D 1 2 3 4 A B C D CMPRO-4H4H 4X4 HDMI MATRIX 1 2 3 4 5 6 7 1 IR IR receiver window accepts the remote control signal of this device. 2 POWER & LED Press this button to power the device on/off. The LED will illuminate when the power is on. 3 EDID & LED Press this button to use the internal/STD or external/TV EDID. The LED will illuminate when STD EDID is selected.
6.2 Rear Panel OUTPUT INPUT 1 2 3 4 A B C D IR IN RS232 ETHERNET POWER DC 5V SERVICE 1 2 3 4 5 6 7 1 INPUT 1~4 Connect input source equipments such as DVD/Blu-ray players with HDMI cables. 2 OUTPUT A~D Connect to HDMI 3D TV/display or monitor for both audio and video or moving/static graphic play. 3 IR IN Connect the supplied IR extender (included in the package) or IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR extender.
6.3 Remote Control 1 POWER Press this button to switch on or set to standby mode of the device. 2 OUTPUT A 1~4 Press buttons 1~4 to selection the nominated input for output A. 3 OUTPUT B 1~4 Press buttons 1~4 to selection the nominated input for output B. 4 OUTPUT C 1~4 POWER 1 OUTPUT A 2 OUTPUT B 3 OUTPUT C 4 OUTPUT D 5 CR-33 Press buttons 1~4 to selection the nominated input for output C. 5 OUTPUT D 1~4 Press buttons 1~4 to selection the nominated input for output D.
6.
6.5 RS-232 Protocols Command Description A1~A4 Switch Output A to 1~4 B1~B4 Switch Output B to 1~4 C1~C4 Switch Output C to 1~4 D1~D4 Switch Output D to 1~4 ABC...1~ABC...4 Switch Output A B C... to 1~4 at the same time P0 Power Off P1 Power On I1~I4 Switch all the output to 1~4 ST Display the current matrix state and F/W version RS System Reset to A1, B2, C3, D4 EM Setting EDID MODE.
7.
8. SPECIFICATIONS Video Bandwidth 300Mbps /10.
9.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.
