PU-8H8CTXIR 8-Way HDMI HDBaseT™ Transmitter with 8x8 IR Matrix (inc.
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction ���������������������������������������������� 1 2. Applications ��������������������������������������������� 1 3. Package Contents ���������������������������������� 1 4. System Requirements ������������������������������ 1 5. Features ���������������������������������������������������� 2 6. Operation Controls and Functions ��������� 3 6.1 Transmitter’s Front Panel ��������������������3 6.2 Transmitter’s Rear Panel ��������������������4 7.
1. INTRODUCTION The HDMI over CAT6 transmitter with IR Matrix is an outstanding device for extending and controlling your HDMI signal. With 8 HDMI input ports and 8 CAT6 output ports this device allows a great amount of sources and display to be controlled and display up to 100 meters away. Moreover, with control systems such as IR, RS-232 and remote control these easy users with all kinds of control habit and occasion.
5. FEATURES • HDMI, HDCP1.1 and DVI compliant • Supports HDMI v1.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Transmitter’s Front Panel 1 2 3 4 5 6 7 1 LCM: This monitor displays your setting information of each IR’s input and output selection. 2 IR: This IR window accepts the remote control signal of this device and all the source and display equipment’s IR signal. 3 Power button and LED: Press this button to turn on the device or press it again to set it to standby mode. The LED will illuminate in green when the power is on and in red when in standby mode.
6.2 Transmitter’s Rear Panel 3 1 2 4 7 8 5 6 1 RS-232 AUX: This slot is to connect with D-Sub 9pin cable from the third device for RS-232 signal sending and controlling. 2 RS-232 MAIN: This slot is to connect with D-Sub 9pin cable from PC/NB for RS-232 signal sending to the device and the third device. 3 IR Blaster 1~All: These slots are to connect with IR blaster cables included in the package for IR signal sending.
8 POE / 24V: This slot is where user connect the 24V DC power adaptor and plug the adaptor to an AC wall outlet for power supply when the CAT 6 out are not connected with power supply. 7. REMOTE CONTROL This remote control can be set with multipal format according to the dipswitch setting. There are total of four dipswitches with mainly two kinds of settings. When dipswitches are all set to ON/↑ the remote control is able to control all outputs and all inputs.
Discrete IR codes for 8x8 IR matrix (IR3) Select / Dipswitch input 1 input 2 input 3 input 4 input 5 input 6 input 7 input 8 output A ↓↓↓↓ 0cx88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91 output B ↑↓↓↓ 0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91 output C ↓↑↓↓ 0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91 output D ↑↑↓↓ 0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91 output E ↓↓↑↓ 0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91 output F ↑↓↑↓ 0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
8.
1 2 3 4 5 6 7 8 ALL TVA 有信號 時 O X X X X X X X O TVB 有信號 時 X O X X X X X X O TVC 有信 號時 X X O X X X X X O TVD 有信 號時 X X X O X X X X O TVE 有信號 時 X X X X O X X X O TVF 有信號 時 X X X X X O X X O TVG 有信 號時 X X X X X X O X O TVH 有信 號時 X X X X X X X O O 9. RS-232 PROTOCOLS 9.
Baud Rate: 9600bps Data bit: 8 bits Parity: None Flow Control: None 9.
PORT 34 OUTPUT C SELECT PORT 44 INPUT4 OUTPUT D SELECT INPUT4 PORT 35 OUTPUT C SELECT PORT 45 INPUT5 OUTPUT D SELECT INPUT5 PORT 36 OUTPUT C SELECT PORT 46 INPUT6 OUTPUT D SELECT INPUT6 PORT 37 OUTPUT C SELECT PORT 47 INPUT7 OUTPUT D SELECT INPUT7 PORT 38 OUTPUT C SELECT PORT 48 INPUT8 OUTPUT D SELECT INPUT8 PORT 51 OUTPUT E SELECT PORT 61 INPUT1 OUTPUT F SELECT INPUT1 PORT 52 OUTPUT E SELECT PORT 62 INPUT2 OUTPUT F SELECT INPUT2 PORT 53 OUTPUT E SELECT PORT 63 INPUT3 OUTPUT F SELECT
PORT 76 OUTPUT G SELECT PORT 86 INPUT6 OUTPUT H SELECT INPUT6 PORT 77 OUTPUT G SELECT PORT 87 INPUT7 OUTPUT H SELECT INPUT7 PORT 78 OUTPUT G SELECT PORT 88 INPUT8 OUTPUT H SELECT INPUT8 10. SPECIFICATIONS Maximum Data Rate 6.75 Gbps (2.
11.
3M 1 2 3 4 5 6 7 3M 30° 8 30° 7M RS-232 Command CSI-8H8CV2IR A A B B C C D D HDMI HDMI HDMI HDMI HDMI HDMI HDMI HDMI H HDMI Cable HDMI RS-232 Command G HDMI F HDMI H G F E D C B A HDMI HDMI HDMI HDMI E HDMI CMLUX-88S HDMI Cable RS-232 Cable 13
12.
www.cypeurope.
