Specifications

7.2 Rear panel

1 2 3 4 5

①

IR OUT ALL: This slot is where you connect the IR blaster cable included

in the package. Place it in the distance that all sources and device are

able to receive the infrared signal.

②

IR OUT A~D: These slots are where you connect with IR blaster cables in-

cluded in the package. Place it in the distance that only the designated

source equipment is able to receive the infrared signal.

③

IR IN ALL: This slot is where you connect the IR receiver cable included

in the package. Place it in the control room or anywhere you wish to re-

mote control the source equipments and send the IR signal through the

existing remote controls.

④

IR IN 1~4: These slots are where you connect with IR receiver cables in-

cluded in the package. Place it near each display for receiving the IR

signal through the existing source remote control.

⑤

DC 5V: Plug the 5V DC power supply into the unit and connect the adap-

tor to AC wall outlet.