Specifications

7. Hardware Description
The following sections describe the hardware components of the unit.
7.1 Front Panel
1 2 3 4 5 6

①
IR sensor: To control the system itself.
②
POWER Button & LED: Press to turn on or set it to standby. When system
is ON the LED will illuminate in GREEN color. Press again to enter into
STANDBY mode, the LED will illuminate in RED color.
③
IR IN 1 & output LED: Press the button to select which output IR signal is to
send and the LED will illuminate according to the selection.
④
IR IN 2 & output LED: Press the button to select which output IR signal is to
send and the LED will illuminate according to the selection.
⑤
IR IN 3 & output LED: Press the button to select which output IR signal is to
send and the LED will illuminate according to the selection.
⑥
IR IN 4 & output LED: Press the button to select which output IR signal is to
send and the LED will illuminate according to the selection.
3