Specifications

1) PMR-506TX radio (with internal battery)

2) Smart Charger with Adaptor

3) Instruction Manual

1 unit

2. Equipment and Accessories Supplied

3. Fitting the Batteries

To charge your radios, carefully follow these instructions.

4. Battery Charging

Power Adaptor

- Input: 100~240VAC 50KHz

- Output: 9V 500mA

Adaptor Power Plug

1) Charger Installation

Connect the power adaptor to the mains power supply and

connect the adaptor power plug to the charger cradle.

When the battery being charged the LED lights red.

2) Radio Cradling & Charging

Remove all radio accessories and insert your radios in the

charging compartment until you hear locking sound. The radio will

start charging and the LED will light red during charging.

3) Charging Completed

The battery charging time is typically 6~7 hours. When the battery

is fully charged the LED will change to green.

ENGLISH

The PMR-506TX uses an internal Lithium Ion or Lithium Ion

Polymer battery which has been pre-installed.

For removal or replacement please contact your local dealer.

Unauthorised attempts to remove or replace the battery will void

your warranty and may damage your product.

LED

Charging Cradle

Note: This unit should not be used during being mounted and

charged on the charging cradle.