PMR-506TX PMR 446 TRANSCEIVER www.ttikorea.co.
Lamp Accessory Jack Charging Terminal Power Button Antenna Neck Strap Ring PTT Button LCD Display Microphone Lamp/Monitor Button CALL Button Compander/ Scan Button Down Button Mode/Lock Button Up Button Speaker Thank you for purchasing TTI radio. All our products are built to offer excellent value by combining advanced features, great design and manufacturing quality.
1. Caution 2. Equipment and Accessories Supplied 3. Fitting the Batteries 4. Battery Charging 5. Radio Control 1) POWER Button 2) PTT Button 3) UP Button 4) DOWN Button 5) MODE Button 6) LAMP / MONITOR Button 7) CALL Button 8) SCAN / LOCK Button 6. LCD Display 7. Basic Radio Operation 8. Function Mode 9.
1. Caution ENGLISH IMPORTANT - READ ALL INSTRUCTIONS carefully and completely before operating your radio and retain this manual for future reference. NEVER connect the radio to a power source other than the supplied battery. This may damage your product. NEVER operate your radio with the antenna less than 5cm from exposed parts of the body. NEVER use the radio in or near a mining facility or other area which uses remotely triggered explosives or an area labelled "Blasting Area".
2. Equipment and Accessories Supplied 1 unit 1 unit 1 unit 3. Fitting the Batteries The PMR-506TX uses an internal Lithium Ion or Lithium Ion Polymer battery which has been pre-installed. For removal or replacement please contact your local dealer. Unauthorised attempts to remove or replace the battery will void your warranty and may damage your product. 4. Battery Charging To charge your radios, carefully follow these instructions.
5. Radio Controls ENGLISH 1) POWER Button Press and hold the POWER button for about 2 seconds. You will hear a confirmation tone to indicate the radio is on. To turn the radio off, press and hold the POWER button for about 2 seconds. 2) Push-To-Talk (PTT) Button Press and hold this button to speak (transmit). Release the button to listen to (receive) messages. You can only communicate with other PMR446 radios when the channel and privacy code settings are the same as yours.
6. LCD Display 1 2 1 2 3 4 5 6 7 8 3 4 5 6 9 7 8 10 11 9 10 11 12 16 15 14 13 13 12 14 15 16 Receiving/Busy Icon Transmit Icon Keypad Lock Icon Monitor Icon Keytone Icon Room Monitor Icon Scan Icon Battery Level Indicator Scrambler Icon Dual Watch Icon Intercom Icon Roger Beep Icon VOX Icon CTCSS Code Icon/Display Compander Icon Channel Display 7. Basic Radio Operation The PMR446 service which this radio uses shares channels on a 'take turns' basis.
ENGLISH mouth and press the PTT. Speak slowly and clearly towards the radio. Release the PTT when you have finished speaking. You will hear messages from other radios within range, with the same channel and privacy code setting. The appropriate icon will appear in the radio display when you receive or transmit a message. 8. Function Mode The Function Mode allows you to program user preferences, activate features and use advanced functions (see Radio Features Explained).
. Radio Features Explained 1) Volume Level There are 7 volume levels to suit your personal preference. To adjust the volume level, press the Up or Down button. and the current volume level are shown in the radio display. 2) Channels This radio operates on any one of the 8 PMR446 licence free channels. To communicate with other PMR446 radios, all units must be switched to the same channel and privacy code. To change the radio channel, press the FUNCTION button until the channel number flashes.
ENGLISH channel the unit will pause for 5 seconds before resuming the dual watch. To activate the dual watch mode, first select a radio channel (see Channels) as the primary channel. To select the dual watch channel press the FUNCTION button until appears. Use the UP or DOWN button to select the desired dual watch channel. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice and activate the dual watch.
7) Key Beep If the Key Beep is activated, your radio will emit a confirmation tone whenever you use the keypad. You can activate or deactivate the Key Beep as required. To change the Key Beep setting, press the FUNCTION button until appears. Use the UP or DOWN button to change the setting. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice. The Key Beep icon will appear when Key Beep is active.
10) Scrambler ENGLISH Scrambler distorts your voice upon transmit and this makes it difficult for others to listen to your communications who do not have the same scrambler decoders. To get clear voice upon receiving the scrambled voice, the receiving radio should be also in this scrambler (Descrambler) mode. To change the scrambler setting, press the FUNCTION button until appears. Use the UP or DOWN button to change the setting. Press the PTT or FUNCTION button or wait for 5 seconds to store your choice.
16) Privacy Code Scan/Decode This radio has Privacy code scan to determine which Privacy Code (CTCSS) is in use on the current channel. To activate the privacy code scan press the FUNCTION button until the privacy code number flashes, then press and hold the Compander/Scan button. The Scan icon will appear when the privacy code scan is active. The radio will scan through the 38 privacy codes (CTCSS). If your radio detects a valid signal the scan will pause for 5 seconds.
ENGLISH 17) Key Lock To avoid changing the channel or function settings accidentally this radio has a lock function. To activate or deactivate the lock press and hold the FUNCTION/ LOCK button for about 2 seconds. The Key Lock icon will appear when the Key Lock is active. The Power, PTT, Lamp/ Monitor, Call and Volume adjustment are unaffected by the Lock. 18) Display Backlight This display backlight will illuminate for approximately 5 seconds whenever anykey is pressed.
CE versions of the PMR-506TX which display the CE symbol on the Product label, comply with the essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/CE.
13. Technical Specifications 1. Operating Frequencies (frequency shown in MHz) : ENGLISH Ch 1 2 3 Frequency 446.00625 446.01875 446.03125 Ch 4 5 6 Frequency 446.04375 446.05625 446.06875 Ch 7 8 Frequency 446.08125 446.09375 2. Channel Spacing: 12.5kHz 3. Power Source: 1 x Li-ion battery 4. Privacy Code/Tone Table (CTCSS frequency shown in Hz): NO 1 2 3 4 5 6 7 8 9 10 11 12 13 Frequency 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.
DECLARATION OF CONFORMITY We, TTI Tech Co., Ltd. (TTI house, 1163-4, Gaepo-dong, Gangnam-gu, Seoul, Korea), declare that the product Kind of equipment: PRIVATE MOBILE RADIO Type-designation: PMR-506TX satisfies all the technical regulations applicable to the product within the scope of Council Directives 2006/95/EC, 2004/108/EC and 99/5/EC: Radio: EN 300 296-1 V1.2.1, EN 300 296-2 V1.2.1 EMC: EN 301 489-1 V1.8.1, EN 301 489-5 V1.3.
