Specifications

9
6.2 Receiver Front and Rear Panels
CAT6 IN
MIN.
EQ
MAX.
DC 5V
HDMI OUT
1 2 3 4
1
EQ MIN./MAX.: Turn the 'EQ' equalization wheel from 0~7 to optimize
the HDMI signal strength according to the transmission length
required.
2
CAT6 IN: Connect to a compatible single CAT6 transmitter device
attached to a source device by HDMI (see Section 8.2).
3
DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.
4
HDMI OUTPUT: Connect to the HDMI or DVI input (with a HDMI to
DVI adaptor) of a display such as an HDTV/HD monitor or connect
to a compatible transmitter (see Section 8.2) in order to extend the
transmission distance.
Note:
A. Cable tested with CAT6/23AWG/Solid cable, results may vary with cables
of another specifcation.
B. Equipment used in cable distance testing included: PS3 120G, 37" Philips
8-bit LCD TV and 40" Samsung 12-bit LCD TV.
C. The gures provided in this manual are for reference only; actual
performance may depend on the source and display used as well as the
cable specication.