PU-1107-KIT Pure digital HDMI over Single CAT6 Extender Set (Repeatable Version) OPERATION MANUAL
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������6 2. Applications �������������������������������������������6 3. Package Contents ����������������������������������6 4. System Requirements ���������������������������6 5. Features ��������������������������������������������������7 6. Operation Controls and Functions �������8 6.1 Transmitter Front and Rear Panels ������� 8 6.2 Receiver Front and Rear Panels ������������ 9 7. Connection Diagram �������������������������� 10 8.
1. INTRODUCTION The PU-1107-KIT is an uncompressed Pure Digital solution to extend HDMI signals via a Single CAT6 cable. The PU-1107-KIT extender set can be used with the PU-1107EX Repeater to extend the HDMI signal over Single CAT6 up to a total of 80m (40m either side of the repeater). It has the added benefit of a 7 step HDMI signal equalization switch to optimize the signal strength. 2.
5. FEATURES 7 step EQ adjustment for HDMI signal equalization v1.3 HDMI, HDCP 1.1 & DVI 1.0 compliant. HDMI over a single CAT6 (pure digital transmission) Supports LPCM 7.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Transmitter Front and Rear Panels HDMI INPUT 1 DC 5V 2 EDID 10 Bit TV/STD 8 Bit 12 Bit 3 4 CAT6 OUT 5 1 HDMI INPUT: Connect to the HDMI or DVI output port of your source equipment such as a DVD/Blu Ray player or Set-top box with an HDMI cable or link up with another compatible receiver unit to extend a signal over long distances. 2 DC 5V: Connect the 5V DC power supply to the unit and plug the adaptor into an AC outlet.
6.2 Receiver Front and Rear Panels EQ CAT6 IN 1 2 MIN. DC 5V HDMI OUT MAX. 3 4 1 EQ MIN./MAX.: Turn the 'EQ' equalization wheel from 0~7 to optimize the HDMI signal strength according to the transmission length required. 2 CAT6 IN: Connect to a compatible single CAT6 transmitter device attached to a source device by HDMI (see Section 8.2). 3 DC 5V: Connect the 5V DC power supply to the unit and plug the adaptor into an AC outlet.
7. CONNECTION DIAGRAM DVD or Blu-ray Player HDMI Input DC 5V HDMI INPUT Transmitter (PU-1107TX) Power Supply CAT6 OUT CAT6 Cable Optional Extender Unit (PU-1107EX) INPUT HDMI DC 5V CAT6 INPUT HDMI CAT6 CAT6 OUT EDID 8 Bit 12 Bit Power Supply CAT6 Cable EQ CAT6 IN MIN. MAX.
8. SPECIFICATIONS 8.1 Technical Specifications Video Bandwidth 2.25 MHz/6.
9.
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.com v1.
