Specifications
169
ELPRO Video Labs s.r.l. - Tel. +39 0117701583 Cypress Technology Co., Ltd. - www.cypress.com
MISCELLANEOUS
12
CH-107 TX/RX
Applications:
The HDMI 1.3 transmitter and receiver over one only CAT6
is an extension tool for your long distance HDMI display
needs. Instead of using expensive HDMI cables, your existing
CAT6 cables/sockets can performs the same functions like
transfer Deep Colour (12 bits/colour) video and new lossless
compressed (Dolby TrueHD, Dolby Digital Plus and DTS-
HD Master Audio) Digital audio, at a bandwidth of up to
225MHz. For best performances, CAT6 AWG23 solid is
recommended.
Features:
Complies with HDMI 1.3, HDCP 1.1 and DVI1.1
standards
Supports digital video formats in Deep Colour Mode
at up to 36 bits (12bits/colour) and new lossless
compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) Digital audio
Supports one only CAT6 cables for data/DDC
transmission
Supports equalize and recover incoming TMDS
data before re-transmitting them with optimal quality
regardless of the incoming signal quality
Supports high definition resolution, at 1080p/8bits
distance can reach 45 m with CAT6 AWG23
Supports CEC bypass
Supports xvYCC (Extended-gamut YCC)
HDMI 1.3 TO ONE CAT6 TRANSCEIVER
new
CLUX-1H4CAT
Applications:
The HDMI 1.3 Splitter over CAT6 has many combinations
of products that allows users to make use of according to
their need. This solution provides a direct input of one HDMI
to one direct output of HDMI (OUT 1), and 3 CAT6 outputs
that allows users to link up a source to display in 4 different
screens simultaneously. Alternatively, the HDMI output can
be treated as an extender to connect to another HDMI splitter
or cascade with other unit in multiple layers. Due to the mass
usage of the CAT6 system and the information allowance
through the CAT6, this design leaves users to display many
types of information without compressed the signal and
display through long distance. Not only so, it also has some
extra functions like EDID, System reset, Deep colour and
IR systems. For best performances, CAT6 AWG23 solid is
recommended.
Features:
HDMI 1.3, HDCP1.1 and DVI1.0 compliant
Supports Deep colour video up to 12bit, 1080p@60Hz
One HDMI source to connect up to 1 HDMI and 3 CAT6
that allows users to link up to 4 displays simultaneously
HDCP keysets allows each output to work independently
when connecting to a HDMI display
Supports DVI source and DVI display by using HDMI to/
from DVI adaptor cable
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master
Audio transmission (32-192kHz Fs sample rate)
Supports a wide range of PC and HDTV resolutions up
to UXGA and 1080p
HDMI cable distance test with 1080p resolution:
OUT1can run up to 10m
Selects EDID from TV mode or STD mode
Deep colour setting of 8 bit or 12 bit
IR remote control
System reset function
Supports high definition resolution, at 1080p/8bits
distance can reach 45 m with CAT6 AWG23
The receiver CH-1106RX must be ordered to be used as
CAT6 receiver box.
1x3+1 HDMI 1.3 TO CAT6 SPLITTER
new
AVAILABLE OCTOBER 2010