Specifications

168
ELPRO Video Labs s.r.l. - Tel. +39 0117701583Cypress Technology Co., Ltd. - www.cypress.com
MISCELLANEOUS
12
CAC-TXA/RXA
Applications:
CAC-TXA/RXA is an Active Connect Multimedia Transmitter
and Receiver Box through 5 coax cables, that permits long
distance displaying of your game/player devices to your
HDMI displayer. For optimum performances the length of the
5 coax cables have to be strictly the same.
Features:
Compliant with HDMI 1.3 and DVI 1.1
Higher data rates enabling new features and applications
New and improved colour gamut (i.e. deep colour xvYCC)
HD audio (8 channel audio support)
High Resolutions from PC up to WUXGA (1920 x 1200),
HDTV up to 1080p/12 bit
Supports CEC
Receiver with power setting (external by PS or internal by
coax)
Supports seamless for VESA DDC, CEC and Hot Plug
Detect (HPD)
The RG6 type 75 Ω can run up to 100m at 720p or 50m
at 1080p (Note 1)
The RG59 type 75 Ω can run up to 50 m at 480p or 30 m
at 720p
Supports xvYCC (Extended-gamut YCC)
Easy to install and to operate
Note 1: RG6 (AWG18 solid) can replace the smaller
RG59 (AWG23) in CATV and domestic applications for
better performances. Cables smaller than AWG23 are not
recommended for this application.
5 COAX HDMI TRANSCEIVER

new
CH-1106TX/RX
Applications:
The HDMI 1.3 transmitter and receiver over CAT6 is an
extension tool for your long distance HDMI display needs.
Instead of using expensive HDMI cables, your existing CAT6
cables/sockets can replace HDMI cables while performing the
same functions like transfer Deep Colour (12 bits/colour) video
and new lossless compressed (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) Digital audio, at a bandwidth
of up to 225MHz. Moreover, you can use your existing remote
control to control your device over a 30/45 meters distance
through the IR blaster. Our HDMI 1.3 Transmitter and receiver
is your ideal choice when looking for a HDMI extender. For best
performances, CAT6 AWG23 solid is recommended (Note 1).
Features:
Complies with HDMI 1.3, HDCP 1.1 and DVI1.1 standards
Supports digital video formats in Deep Colour Mode at up
to 36 bits (12bits/colour) and new lossless compressed
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio) Digital audio
Supports CAT6 cables for data/DDC transmission
Supports equalize and recover incoming TMDS data
before re-transmitting them with optimal quality regardless
of the incoming signal quality
Supports high definition resolution, at 1080p/8bits
distance can reach 45 m with CAT6 AWG23
Supports CEC bypass
Supports xvYCC (Extended-gamut YCC)
Supports IR Receiver & IR Blaster
Supports full range of IR frequencies from 20~60 KHz
Note 1: The receiver CH-1106RX can be ordered to be
used as receiver box to interface the outputs of CLUX-
1H4CAT, CLUX-1H8CAT and CMLUX-4H4CAT
HDMI 1.3 TO CAT6 TRANSCEIVER


new