AU-11CD-4K De-embed Audio from HDMI (4K Resolution support) Operation Manual
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 2 6. Operation Controls and Functions ������� 3 6.1 Top Panel ������������������������������������������3 6.2 Right Panel ����������������������������������������4 6.
1. INTRODUCTION The HDMI™ 4Kx2K Audio Extractor allows you to extract audio signals from your HDMI source. When connecting to a TV or display you don’t always get the best audio, or in the case of a PC monitor, no audio at all. So with this Audio Extractor you can take your original HDMI audio signal and convert it to digital optical or analog stereo L/R audio. This means that you can output your audio signal to external speakers or extend your audio signal pathway.
. FEATURES • Compliant with HDMI, HDCP 1.2 and DVI 1.
. OPERATION CONTROLS AND FUNCTIONS 6.1 Top Panel LPCM Link Power 1 2 3 1 LPCM: This LED will illuminate when the output audio EDID is switch to LPCM 2CH. 2 Link: This LED will illuminate when input source is connected with HDMI signal. 3 Power: This LED will illuminate when the unit is connected with power supply.
6.2 Right Panel Service HDMI In 1 2 1 Service: This port is reserved for firmware update only. 2 HDMI IN: This slot is to connect with source equipment such as Blu-ray/PS3 player with HDMI signal sending. 6.3 Left Panel HDMI Out Optical L/R 1 2 3 1 HDMI OUT: Connect to the display (TV/monitor) with an HDMI cable for video and audio signal output. For 4Kx2K or 3D image display, an equivalent standard display is required.
6.4 Front Panel DC 5V Bitstream TV Power LPCM 7.1CH 1 2 3 1 TV/Bitstream/LPCM 7.1CH: This switch allows users to select the source’s audio EDID. TV Mode: Switch to TV mode to use the HDMI output port’s EDID. Bitstream Mode: Switch to Bitstream mode to use the HDMI output port’s EDID, the audio supports up to compressed audio 5.1 channels. LPCM 2CH Mode: Switch to LPCM 2CH mode to use HDMI output port’s EDID, the audio supports up to LPCM 2 channels.
7.
8. SPECIFICATIONS Video Bandwidth 300Mbps / 10.2Gbps Input Ports 1 x HDMI, 1 x Mini-USB (service only) Output Ports 1 x HDMI, 1 x Optical, 1 x L/R(3.5mm Phone Jack) HDMI Audio Sampling Rate Up to 192 kHz Optical S/PDIF Audio Sampling Rate Up to 192 kHz HDMI Audio Format LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio Optical Audio Format LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.
8.1 Audio Supports Chart Output HDMI Optical L/R 2CH V V V LPCM 5.1 V LPCM 7.1 V Bitstream 5.1 V Bitstream 7.1 V Audio Mode V 9.
www.cypeurope.
