User Manual

Application for Certification Page 71 of 89
Work order: 2000459 / QRTL00-368
ComSpace Corporation Model:CDVSL411SAV00 FCC ID: PCKCDVSL411SAV001
Odyssey Series Model 2000-800 Specifications
GENERAL
No
.
Parameter Requirement Comments
1 Frequency Range
Receiver:
Transmitter:
851 MHz – 869 MHz
806 MHz – 824 MHz
2 Channel Spacing 25 kHz 12.5KHz steps
3 Duty Cycle 100% – RX
10% – TX
4 Input Voltage 13.8V ±10% DC negative
ground
5 Operating Voltage
Range
15.2V – 12.4V
Operational > 10.8VDC
Degraded operation below 12.4V
6 Current Drain 1.25A Standby
1.50A Receive
3.50A Transmit
At 13.8 VDC. With approximately
+10% margin.
7 RF Impedance
50 Ω
Unbalanced
8 Dimensions 171.5mm (6.75”) W x
54.0mm (2.125”) H x
203.2mm (8.0”) D
9 Weight 3.1 Kg (6.7 lb.) Mobile 2 Kg (4.42 lb.)
Microphone 245 g (0.54 lb.)
Bracket 567 g (1.25 lb.)
Pwr. Cable (12ft. with fuse) 227 g (0.5
lb.)
10 Conducted Emissions -81dBm in RX Band
-61dBm in TX Band
-57dBm elsewhere
11 FCC ID TBA To Be Assigned
12 FCC Compliance FCC Part 15 & Part 90 Part 15, Class B digital device
13 Normal Test
Conditions
Temperature +20°C
Relative Humidity 75% Max.
Test Voltage 13.8V
14 Sub-channel Data
Rate:
Time Slot Data Rate:
16 kbps for single sub-channel
8.0 kpbs for single time slot
An 800 MHz, 25 kHz DC/MA®
channel is divided into four sub-
channels with channel offsets of
±2400 Hz and ±7200 Hz.
15 Temperature Range -30°C to +60°C
16 Shock TIA/EIA 603, Section 3.3.4
17 Vibration TIA/EIA 603, Section 3.3.5