User Manual

Instruction Manual 8
Repeater Specifications
Odyssey

 Series Model 2000 8RPT
General
No. Parameter Requirement Comments
1 Frequency Range
Receiver:
Transmitter:
806 MHz – 824 MHz
851 MHz – 869 MHz
2 Channel Spacing 25 kHz 12.5KHz steps
3 Duty Cycle 100% – RX
100% – TX
4 Input Voltage 115Vac, nominal Two separate circuits required
5 Current 20A service
6 RF Impedance
50 Ω
Unbalanced
7 Frequency Stability 0.0022ppm
8 Spurious and Image Suppression -85dBc
9 FCC ID PCKCDRTL841FL0001
10 FCC Compliance FCC Part 15 & Part 90 Part 15, Class A digital device
11 Normal Test Conditions Temperature +20°C
Relative Humidity 75% Max.
12 Sub-channel Data Rate:
Time Slot Data Rate:
16 kbps for single sub-channel
8.0 kpbs for single time slot
An 800 MHz, 25 kHz DC/MA® channel
is divided into four sub-channels with
channel offsets of ±2400Hz and
±7200Hz.
13 Temperature Range -30°C to +60°C
40.25 inches – 23 U 19 inch standard rack/cabinet
without trunk controllers
Total Panel Size
54.25 inches – 31 U 19 inch standard rack/cabinet
with trunk controllers
AC Power Distribution Units 2U high x 4 inches deep 19 inch standard rack/cabinet
two 1U units
Power Supply Enclosure 3U high x 21.6 inches deep 19 inch standard rack/cabinet
RF Amplifier Enclosure 8U high x 20.1 inches deep 19 inch standard rack/cabinet
LLRF Enclosure 3U high x 15.83 inches deep 19 inch standard rack/cabinet
Digital Enclosure 6U high x 11.49 inches deep 19 inch standard rack/cabinet
Fan Tray 1U x 8 inches deep 19 inch standard rack/cabinet
Used for airflow through Digital
Enclosure
1U Spacer Panel 1U high 19 inch standard rack/cabinet
Used in two locations:
(1) to provide for airflow through the
Digital Enclosure
(2) spacer at top of assembly
14
Trunk Controllers 8U x 7 inches deep 19 inch standard rack/cabinet
eight 1U units
15 Weight 240 pounds Rack/cabinet not included