Datasheet

www.cynergy3.com
© 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO 9001 CERTIFIED
IWTTU Series
Industrial Wireless Temperature Transducer
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
IWTTU 2018
Telephone [phone]
Email:[e-mail]
DESCRIPTION
The IWTTU Wireless Temperature Transducer is a cost effective replacement to a
traditionally wired temperature transducer that offers the advantages of a low-cost
installation in inaccessible and expensive installation environments.
It is easily paired to the compatible IWR family of single- or five-channel wireless
receivers thus offering a “plug and play” solution to your temperature measurement
applications.
The instrument uses either J or K type thermocouples or 3-wire RTD sensors fitted to an
acetal housing giving excellent media compatibility for the harshest of applications.
Compression fittings are available which allow the head to be orientated in the required
direction.
The IWTT sensor should be used with either an IWR-1 or IWR-5 receiver. A line-of-sight
range of up to 750m is possible depending on the wireless receiver used (refer to
datasheets IWR-1 & IWR-5 for further information).
Each device is temperature compensated, calibrated and supplied with a traceable
serial number.
Single or five channel receivers available
User-selectable transmission update rates
User-selectable 1-5V or 4-20mA receiver outputs
Receiver clean contacts provide process alarm functions
Simple DIL switch pairing with the single or five channel receiver
Five year battery life at 10 second transmission update rate
Up to 750m line-of-site range (depending on receiver)
TYPICAL APPLICATIONS INCLUDE:-
-–Simple cable replacement installation
dispense with expensive cable runs
- – pumping stations,Environmental monitoring
sewage plants, water treatment
- – boiler rooms, plantFacilities management
hydraulics, plant pneumatics
- – tanks farms, processAsset monitoring
plants, HVAC and building management
- – temporary installation forService Contract
servicing and field trials
Transmitter Temperature Ranges
Standard products are factory configured as below:-
J-Type 0 to 1200°C = 4-20mA
K-Type 0 to 1350 C = 4-20mA°
RTD type -200 to +850 C = 4-20mA.°
Transmitter Output
*Transmission Frequency 2.4 Ghz
Transmit Power 18 dBm
System Channel User selectable via DIL switch
Antenna Integral 0dBi
*Compliant with EN 300 328, V1.8.1
System Performance
Accuracy (Non-Linearity <±0.1% /& Hysteresis) FS
Temperature Coefficent ±500ppm/ C°
Instrument Power Source
Battery Type User replaceable Lithium C cell
Battery Life Five years at 10 second update
rate
Battery Shelf Life 10 years
Made in the UK
PT100 RTD Sensors
K or J Type Thermocouples
6mm stainless steel sheath