Datasheet

1/4"NPT mounting thread
www.cynergy3.com
© 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO 9001 CERTIFIED
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
ITTU 2018
Telephone [phone]
Email:[e-mail]
Made in the UK
ITTU Series
PT100 RTD Sensors
4-20mA linearised output, configurable to application specific temperature range
K or J Type Thermocouples
6mm stainless steel sheath
These temperature probe assemblies are all
constructed using a stainless steel sheath
containing either a J or K type thermocouple
or a P100 RTD sensor element.
The aluminium head contains a
programmable 4-20mA transmitter which,
although pre-programmed for the standard
temperature range of the sensor can be
changed by the user* so that the 4-20mA
output corresponds to any temperature
range within the sensors' capabilities.
A wide range of accessories can be chosen,
from plastic and metal cable glands to
compression fittings and stainless steel
pockets (not supplied).
Please contact our sales department with
details of the probe you are looking for and
we will give you a very competitive
quotation.
*Requires free software download and ICAB-1 cable
Programmable Temperature Probes - Thermocouple
and PT100 Assemblies
Temperature Sensor Style
The standard sensor type is shown in the diagram below.
Standard products are factory configured as below:-
J-Type 0 to 1200 C = 4-20mA°
K-Type 0 to 1350 C = 4-20mA°
RTD type -200 to + +850 C = 4-20mA.°
A free software download is available from the Cynergy3 website which enables the scaling of the
4-20mA output to be customised to suit your specific application*.
The sheath length ranges from 100mm to 400mm for the PT100 sensor version and from 150mm
to 400mm for the thermocouple sensor version. This style of thermocouple allows any standard
6mm compression fitting to be used, making it easy to fit the sensors to any process connection.
The head mounting thread is 1/4"NPT.
*Requires ICAB-1 USB to serial converter programmingcable
Connection Head
The dimensions of the standard aluminium connection head are shown below:
Transmitter Technical Specification
Power Supply 12-35 Vdc 2-wire system
Output 4-20mA
Output LoadR 500 maximum, typically 250
L
ΩΩ
Typical Accuracy RTD overall 0.1%,
thermocouple overall 0.2%
Temperature Drift 25 ppm/ °C FS≤
Op. ?ambient Temp -20 to +50 °C
Storage Temp -40 to 120 °C
THERMOCOUPLE
RTD 3-WIRE
+
-
24Vdc
RTD
+
+
-
-
24Vdc
R
L
Part No. Description Part No. Description
ITTUP100A PT100 6x100mm 4-20mA ITTUJ200A J type 6x200mm 4-20mA
ITTUP150A PT100 6x150mm 4-20mA ITTUJ300A J type 6x300mm 4-20mA
ITTUP200A PT100 6x200mm 4-20mA ITTUJ400A J type 6x400mm 4-20mA
ITTUP250A PT100 6x250mm 4-20mA ITTUK150A K type 6x150mm 4-20mA
ITTUP300A PT100 6x300mm 4-20mA ITTUK200A K type 6x200mm 4-20mA
ITTUP400A PT100 6x400mm 4-20mA ITTUK300A K type 6x300mm 4-20mA
ITTUK400A K type 6x400mm 4-20mA