Datasheet

www.cynergy3.com
© 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO 9001 CERTIFIED
IPSLU-M12 series
Low Range Industrial Pressure Sensor with M12 4-Pin connector
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
IPSLU-M12 2018
Telephone [phone]
Email:[e-mail]
The -M12 isIPSLU suitable for use in a
wide range of applications. The probe
uses a piezo-resistive sens ,silicon or
giving excellent media compatibility within
an oil filled 316L stainless steel housing
The electronics incorporate a
microprocessor based amplifier, requiring
no adjusting and giving stable electronics,
especially in high vibration/shock
applications.
Each device is temperature compensated,
calibrated and supplied with a traceable
serial number and calibration data.
Custom versions can be made for
particular applications.
Accuracy < 0. % ± 25 FS BFSL
Gauge or Absolute pressure reference
1/4"NPT process connection
Pressure ranges from 1 psi 15 psito
Piezo-resistive sensor
Stainless steel body & diaphragm
Various outputs including Volts and mA.
Options available on the -M12 transmitter.IPSLU pressure
Pressure range
Output type
Mating cable and plug assemblies are available - see datasheet M12 Cable Set Series
Suitable applications
HVAC Mechanical engineering
Pneumatics Environmental engineering
Rainwater harvesting Automotive testing
Agricultural machinery Tank gauging
Laboratory testing , Tote or pallet tankIBC IBC
Performance
Accuracy (Non-Linearity <±0. % / ( ) for gauge refererence& Hysteresis) 25 FS BFSL
Setting Errors (offsets) 2-wire Zero & Full Scale, <±0.5% / FS
3-wire Zero & Full Scale, <±0.5% / FS
Permiss ble Load 2-wire R = [(Supply-9min)/0.02]i
max
W
3-wire R = 10k
min
W
Influence Effects Supply <0.005% / 1VFS
Load 0.05% / kFSO W
Electrical Protection
Supply reverse polarity No damage/no function
Electromagnetic compatibility CompliantCE
Mechanical Stability
Shock 100g / 11s
Vibration 10g (20 - 2000Hz)RMS
Temperatures & Thermal Effects
Media Temperature -40ºC to +125ºC
Ambient Temperature -20ºC to +80ºC
Storage temperature -40ºC to +125ºC
Compensated temperature range +20ºC to +80ºC
Thermal Zero Shift ( ) <±0.04% / /ºCTZS FS
Thermal Span Shift <-0.015% /ºC
Material Specifications
Housing 3 Stainless Steel16L
“O” ring seals Viton
Diaphragm 316L Stainless Steel
Media wetted parts Housing & connection, “O” ring seal,
diaphragm
Miscellaneous
Current consumption 2 -wire Limits at 28mA
3-wire Typical 6mA
Weight Approx 10 g3.5oz ( 0 )
Installation position Any, small zero shift when tilted through
90º
Operational Life > 100x 10 cycles
6
Insulation resistance > 50 hms at 50VdcMO
Environmental protection IP67 (only when used with a similarly
rated connector)
Made in the UK