Datasheet

www.cynergy3.com
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO 9001 CERTIFIED
IPS seriesL
Low Range Industrial Pressure Sensor
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Email:[e-mail]
The IPSL is suitable for use in a wide range
of applications. The probe uses a piezo-
resistive sens ,silicon or giving excellent
media compatibility within an oil filled
316L stainless steel housing
The electronics incorporate a
microprocessor based amplifier, requiring
no adjusting and giving stable electronics,
especially in high vibration/shock
applications.
Each device is temperature compensated,
calibrated and supplied with a traceable
serial number and calibration certificate.
There is a choice of internal O ring seals to
ensure that the device is compatible with a
wide range of media.
Custom versions can be made for
particular applications.
Accuracy < 0. % FS BFSL ± 25
Gauge or Absolute pressure reference
Pressure ranges from 50 mbar to 1000 mbar
Piezo-resistive sensor
Stainless steel body & diaphragm
Various outputs including Volts and mA.
Options available on the IPSL transmitter.pressure
Pressure range
Pressure reference (G or Abs)
Output type
Suitable applications
HVAC Mechanical engineering
Pneumatics Environmental engineering
Rainwater harvesting Automotive testing
Agricultural machinery Tank gauging
Laboratory testing IBC, IBC Tote or pallet tank
Performance
Accuracy (Non-Linearity <±0. % / FS (BFSL) for gauge, < 0.5% for Absolute& Hysteresis) 25 ±
Setting Errors (offsets) 2-wire Zero & Full Scale, <±0.5% / FS
3-wire Zero & Full Scale, <±0.5% / FS
Permiss ble Load 2-wire R = [(Supply-9min)/0.02]i
max
W
3-wire R = 10k
min
W
Influence Effects Supply <0.005% FS / 1V
Load 0.05% FSO / kW
Electrical Protection
Supply reverse polarity No damage/no function
Electromagnetic compatibility CE Compliant
Mechanical Stability
Shock 100g / 11s
Vibration 10g RMS (20 - 2000Hz)
Temperatures & Thermal Effects
Media Temperature -40ºC to +125ºC
Ambient Temperature -20ºC to +80ºC
Storage temperature -40ºC to +125ºC
Compensated temperature range +20ºC to +80ºC
Thermal Zero Shift (TZS) <±0.04% /FS/ºC
Thermal Span Shift <-0.015% /ºC
Material Specifications
Housing 303 Stainless Steel
“O” ring seals Viton
Diaphragm 316L Stainless Steel
Media wetted parts Housing & connection, “O” ring seal,
diaphragm
Miscellaneous
Current consumption 2 -wire Limits at 28mA
3-wire Typical 6mA
Weight Approx 100g
Installation position Any, small zero shift when tilted through
90º
Operational Life > 100x 10 cycles
6
Insulation resistance > 50MOhms at 50Vdc