Datasheet

IPSAT Series
In Pressure Transducertrinsically Safe
The series is ideally suited in hazardousIPSAT for use in a wide range of industrial applications
areas The probe uses a piezo-resistive sens , within. ceramic or giving excellent media compatibility
a stainless steel housing
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics, especially industrial applications.
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration data.
Accuracy < 0. % ± 25 FS BFSL
Pressure ranges from -1 to 400 bar
Piezo-resistive thick film ceramic sensor
Stainless steel body
Performance
Accuracy (Non-Linearity <±0. % / ( )& Hysteresis) 25 FS BFSL
Setting Errors (offsets) Zero & Full Scale, <±0.5% / FS
Electrical Protection
Supply reverse polarity No damage but also no function
Electromagnetic compatibility CompliantCE
Mechanical Stability
Shock 100g / 11s
Vibration 10g (20 - 2000Hz)RMS
Environment & Thermal Effects
Ambient Range 75Temperature -20ºC to + ºC
Storage temperature - 0ºC to + ºC280
Compensated temperature range +20ºC to + ºC80
Thermal Zero Shift ( ) <±0.04% / /ºCTZS FS
Thermal Span Shift <±0.015% /ºC
Permissible environment Zone 0
Material Specifications
Housing Stainless Steel316
“O” ring seals Viton
Diaphragm Ceramic Al O 96%
23
Media wetted parts Housing & connection, “O” ring seal,
diaphragm
Weight Approx 100g
Installation position Any
Operational Life > 100x 10 cycles
6
Insulation resistance > 50 hms at 50VdcMO
Pressure Ranges
Nominal Pressure, Gauge, bar 1 2 5 10 20 50 100 250 400
Compound range bar -1 to 0 -1 to 2 -1 to 5 -1 to 9 -1 to 19 -1 to 24
Permissible Overpressure bar 2 4 10 20 40 100 200 400 650
Burst Pressure bar 4 5 12 25 50 120 250 500 650
www.cynergy3.com
© 2017 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO 9001 CERTIFIED
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
IPSAT 2017
Telephone [phone]
Email:[e-mail]
Output Signal and Supply Voltage
Wire system Output Supply Voltage Connection sPin No
2-wire 4-20mA 10-28Vdc +ve Supply -ve Supply GroundPin 1 Pin 2 Earth Pin
Approvals :-
ATEX IECE/x
EII 1G Ex ia T4 Ga (Ta -see schedule)IIC
Made in the UK