User guide

 Network Time Synchronization.

 Self-diagnostics with automatic notification including hard disk drive S.M.A.R.T. protocol

 Live or Recorded Video Access via Ethernet.

 Built-in web client. (Live, Search & Playback)

 User authentication, 3 user levels and User level – Camera partitioning setup for user

management of up to 20 user registrations

 Built-in network interface (10Base-T / 100Base-TX / 1000Base-T) for recording and client access.

 IP routing function for direct camera setup via client access.

 Up to 2 HDDs can be installed (1 HDD inside and 1 external HDD can be added to Sata connector

at right side of the case)

 One USB 2.0 Port

 Supports ONVIF cameras.

This is a global interface standard that makes it easier for end users, integrators, consultants,

and manufacturers to take advantage of the possibilities offered by network video technology.

ONVIF enables interoperability between different vendor products, increased flexibility, reduced

cost, and future-proof systems.