User guide

1. Description

This manual applies to the HNR-E10450/HNR-E20450 network video recorder.

The HNR-E10450/HNR-E20450 network video recorder supports up to 4 network cameras. It can

record high quality Full HD images onto its maximum capacity of hard disk drives.

The HNR-E10450/HNR-E20450 is extremely straightforward to install and setup, as it detects network

cameras and defines the parameters of each through a dedicated configuration wizard. You can start

monitoring instantly, as the images are automatically assigned to a layout menu.

The alarm input and alarm output can be used to connect various third party devices, such as, door

sensors and alarm bells.

1.1 Components

The system comes with the following components:

 Network Video Recorder unit with HDD installed

 Power Adaptor

 Power Cord

 Wireless Antenna (HNR-E20450 model)

 Installation CD including NC-Titanium Software, Installation Guide and User Manual

Note: Check your package to make sure that you received the complete system, including all

components shown above.

1.2 Key Features

Your network video recorder (NVR) provides recording capabilities up to 4 camera inputs. It provides

exceptional picture quality in both live and playback modes, and offers the following features:

 Up to 4 network cameras can be connected and recorded. ( up to 2 network cameras with wifi)

 Up to 16Mbps network camera input bandwidth can be recorded.

 H.264, MPEG-4 and JPEG multi format.

 Quick setup by automatic camera detection and simple setup

wizard without the use of PC.

 Supports HD network camera input.

 Continuous Recording with the overwrite Mode.

 Multiple Recording Mode. (Schedule, Pre-Event, Text-In and Event Recording)

 Multiple Search Engines. (Date/Time, Calendar, Event, Text-In, Bookmark)

 Daylight savings time change function.

 Alarm handling with history log and Pre-alarm recording.

 Text Input for POS.