User guide

-. Preset button:
Set the preset position for the PTZ camera. Select “Number” to set preset number and click the
button to save a current video position. Select “Number“ and click the button to
move the PTZ ca
mera to preset position.
4.1.4 Event Status Screen
You can monitor live video from a camera where an event is detected. The event list on the left side
display live events detected at the network video device. The live events are listed only during live
monitoring. Click the Event tab, and the Event Status screen appears.
•
Event status icons:
Display the status of event such as Alarm-In, Motion, and Video Loss from each came and Alarm-
In and System Event by NVR itself.
Alarm In, displays the detection of an alarm input.
Motion, displ
ays the detection of a motion event
V
ideo Loss, displays the detection of network fail from camera.
Text-In, displays the detection of text-in data.
System Event, displays the
detection of HDD high temperature.
63