User guide

2) Record
Set a weekly recording schedule for each channel. A combination of a schedule and an event is
possible.
•
Schedule
Dra
g or click area by a box unit at first. A pop up window will appear. Then, set recording settings
for the corresponding day. Click the “Apply to All” button to apply the same settings to all channels.
• Record Setup
-. Pre Time: Enter the pre-recording time. When the NVR is in the Event Record mode it is
possible to have it record images before the event occurs.
-. Post Time: Enter the post-recording time. When the NVR is in the Event Record mode it is
possible to have it record images after the event occurs.
-. Audio Record: Mark checkbox to activate audio recording.
Click the OK button to save your changes and exit the schedule setup screen.
39