User guide

• Device Setting
* Device Type: Select Device Type to be recorded in the drop-down list.
-. CIFS: A file format for a NAS device.
-. NFS: A file format for a NAS device.
* Address: Enter IP address for NAS device.
* Remote Directory: Enter directory or folder location to be recorded in the NAS device.
* ID/Password: Enter ID and Password. The network camera will ask them whenever you access
NAS device.
* Capacity: Enter the capacity of storage to be used. It must be less than the total storage
capacity.
Select a NAS device from the list and click the Format button in case of unformatted storage. You
must enter total size to be used in Recording Capacity before formatting.
Note1: Common Internet File System (CIFS) is a remote file access protocol that forms the basis
for Windows file sharing, network printing, and various other network services. CIFS requires a
large number of request/response transactions and its performance degrades significantly over
high-latency WAN links such as the Internet.
Note2: Network File System (NFS) is a network file system protocol, allowing a user on a client
computer to access files over a network in a manner similar to how local storage is accessed. NFS,
like many oth
e
r protocols, builds on the Open Network Computing Remote Procedure Call (ONC
RPC
) system.
3.1.2 Camera Setup
You can set the NVR to detect and register your cameras connected from network.
1) Easy Install
Refer to [ste
p
3] of Chapter 2.3 for more detail operation.
31